### What this PR does / why we need it?
In code files such as`mooncake_connector.py`,
`vllm_config.model_config.hf_config` is used to get the LLM configs.
This approach works for LLMs, but not for multi-modal models. For
multi-modal models, `vllm_config.model_config.hf_text_config` must be
used instead to get the LLM configs.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
Existing UT
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: ApsarasX <apsarax@outlook.com>
### What this PR does / why we need it?
Currently, `torch_npu.npu_grouped_matmul_swiglu_quant` can only support
weight nz, so we need to trans w13_weight, w2_weight to nz forcely.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
This PR deletes `cudagraph_batch_sizes` in `MtpProposer` and reuses the
one in `NPUModelRunner`.
During our deployment of DeepSeek-V3.2 with MTP across machines 2P2D and
conducting AISBench stress testing, an error occurred (see below). After
investigation, we found that
`compilation_config.cudagraph_capture_sizes` is modified by
`adjust_cudagraph_sizes_for_spec_decode` in `NPUModelRunner`. This
modification only updates `cudagraph_batch_sizes` in `NPUModelRunner`
but is not synchronized to `MtpProposer`. After discussion (CC @yiz-liu)
, we believe it is unnecessary to maintain `cudagraph_batch_sizes` in
`MtpProposer`; it should directly use the variable from
`NPUModelRunner`.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: QiuChunshuo <qiuchunshuo@huawei.com>
### What this PR does / why we need it?
Now `VLLM_ASCEND_ENABLE_NZ` will have three options:
0: disable nz;
1: only quant case enable nz;
2: enable nz as long as possible;
And `VLLM_ASCEND_ENABLE_NZ`=1 by default.
All cases are shown in the table below:
| | W4A4 | W4A8 | W8A8 | fp16/bf16 | fp32 |
|---|---|---|---|---|---|
| trans nz | can't support nz | trans nz by default | trans nz by
default | trans nz when VLLM_ASCEND_ENABLE_NZ is 2 | can't support nz |
| transpose | only support not transpose case | only support transpose
case | only support transpose case | linear: only support not transpose
case<br>gmm: only support transpose case | same to fp16/bf16 |
Some exceptional cases:
1. MLAPO op need to do some additional processing on the weights,
including trans nz. If use MLAPO op, some weight will be transformed to
nz forcely;
2. MLA/SFA's weight `W_UV` will be used by op
`torch.ops._C_ascend.batch_matmul_transpose`, and this op can't support
nz currently;
### Does this PR introduce _any_ user-facing change?
Now fp16/bf16 weight will not trans nz by default.
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
vLLM community has integrated their MooncakeConnector. The original
scripts will now find this MooncakeConnector instead of the one from
vLLM-Ascend. All scripts that involve using the MooncakeConnector need
to be modified to another name.
### Does this PR introduce _any_ user-facing change?
Yes, users need to use a new name to load vLLM-Ascend MooncakeConnector.
### How was this patch tested?
By CI.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: nwpu-zxr <zhouxuerong2@huawei.com>
### What this PR does / why we need it?
1. In addition to
[#4168](https://github.com/vllm-project/vllm-ascend/pull/4168),
[#5011](https://github.com/vllm-project/vllm-ascend/pull/5011), this PR
adds two more pattern for AddRmsnormQuant with SP enabled. The key
difference is to insert an additional `maybe_all_gather_and_maybe_unpad`
between `addrmsnorm` and `quantize`.
2. This PR also introduce another api `torch.ops.vllm.quantize`, so that
we pass `input_scale` and `input_scale_reciprocal` at the same time.
This is because `npu_add_rms_norm_quant` and `npu_quantize` requires
different `div_mode`. To avoid introducing additional reciprocal
calculation in runtime, we have to pass both of them to quantize api.
3. Removes redundant `AscendQuantRmsnorm`.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
This PR aim to implement model runner v2 basic framework in vllm-ascend,
the e2e function is not guaranteed by this pr.
### Does this PR introduce _any_ user-facing change?
use envs.VLLM_USE_V2_MODEL_RUNNER to decide if choose model_runenr_v2.
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: Ronald1995 <ronaldautomobile@163.com>
### What this PR does / why we need it?
We will expose the enabling switch for npugraph_ex to better facilitate
subsequent optimization.
### Does this PR introduce _any_ user-facing change?
Previously, the enable_npugraph_ex switch would trigger an error; now we
have removed the error reporting mechanism to better facilitate
subsequent optimization efforts.
Basic functionalities are available in CANN and torch_npu for Q3, while
advanced optimizations will depend on the Q4 release.
### How was this patch tested?
llm =LLM(
model=model,
enforce_eager=False ,
additional_config={
"enable_npugraph_ex": True
},
compilation_config={
"cudagraph_mode": "FULL_DECODE_ONLY",
"cudagraph_capture_sizes": [16],
},
}
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: p00465316 <panchao13@huawei.com>
Co-authored-by: p00465316 <panchao13@huawei.com>
Co-authored-by: weijinqian0 <1184188277@qq.com>
### What this PR does / why we need it?
The mooncake_connector.py file was importing the wrong arguments to the
file, which could cause errors when use PCP; this issue has been
corrected.
### Does this PR introduce _any_ user-facing change?
NO
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: daishixun <dsxsteven@sina.com>
pick from https://github.com/vllm-project/vllm-ascend/pull/4736 to fix
the merge conflict
### What this PR does / why we need it?
Currently, the all_reduce operation in _sync_metadata_across_dp is
performed with gloo backend which is extremely time-consuming when
DPEngineCores are in different nodes. This operation cannot be ignored
by async scheduling in multi-node-scenarios with speculative decoding
(e.g., EAGLE, mtp).
This pr eliminates the all_reduce operation for D Nodes and change the
input parameter of MoEDispatch & MoeCombine operators to make MC2EP
support different num_tokens across all ranks.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
Tested with PD disaggregation (2P: DP2TP8EP16 1D: DP8TP4EP32) scenarios
while enabling async scheduling. This pr can remove cross-node
all_reduce with gloo backend and further reduce latency with correct
accuracy.
---------
Signed-off-by: linfeng-yuan <1102311262@qq.com>
Co-authored-by: linfeng-yuan <1102311262@qq.com>
### What this PR does / why we need it?
This PR fixes a bug in the moe_mlp module by correcting the arguments
passed to the torch_npu.npu_dequant_swiglu_quant function.It properly
converts group_list from a cumulative sum to counts for the group_index
parameter.
### Does this PR introduce _any_ user-facing change?
No
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: tanqingshan (A) <50050625@china.huawei.com>
Co-authored-by: tanqingshan (A) <50050625@china.huawei.com>
### What this PR does / why we need it?
Currently, the initialization and fundamental functions of
RecomputeScheduler are broken with `vLLM v0.12.0`. This PR fixes the
conflicts of `RecomputeScheduler` and refactor its implementations by
inheriting original `Scheduler` of vLLM. Meanwhile, this PR also
supports async cheduling with recompute scheduler by implementing
`AsyncRecomputeScheduler` which is simply inherited `AsncyScheduler` of
vLLM and `RecomputeScheduler` of vLLM-Ascend with python MRO.
### Does this PR introduce _any_ user-facing change?
No. The switch naming is the same as v0.11.0 :
`recompute_scheduler_enable`
### How was this patch tested?
E2E serving with 2P1D dsv3.1 passed. The performance was the same as
original vllm scheduler with `async_scheduling` and preempted requests
in D Nodes are successfully transfered to Proxy and further to P Node.
This significantly improves the performance and robustness of PD
disaggregation deployments.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: linfeng-yuan <1102311262@qq.com>
### What this PR does / why we need it?
This PR standardizes the fusion naming, changing
`enable_quantization_fusion` to `fuse_norm_quant`, and enables e2e
testing.
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
CI passed with new added/existing test.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: wxsIcey <1790571317@qq.com>
### What this PR does / why we need it?
Current mooncake connector has following problems with PP and MTP
enabled:
1. MTP layer kv caches are not transfered, it may cause decreasing of
accept ratio: This PR add MTP layer indices for last PP stage after
calculating end_layer in transfer_kv_cache
2. While MTP enabled, PP layers divided by default may cause imbalance
between stages, we need to use `VLLM_PP_LAYER_PARTITION` environment to
make it balance by hand, but in mooncake connector kv transfer, decode
doesn't know the partition of prefill node: This PR add config
`pp_layer_partition` in `kv_connector_extra_config` to make decode node
acquire the partition information of prefill node.
### Does this PR introduce _any_ user-facing change?
When prefill using `VLLM_PP_LAYER_PARTITION` environment, add
`pp_layer_partition` in `kv_connector_extra_config` like below:
```
export VLLM_PP_LAYER_PARTITION=33,28
"kv_connector_extra_config": {
"use_ascend_direct": true,
"prefill": {
"dp_size": 1,
"tp_size": 8,
"pp_size": 2,
"pp_layer_partition": "33,28"
},
"decode": {
"dp_size": 16,
"tp_size": 1,
"pp_size": 1
}
}
```
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: lidenghui <lidenghui1110@gmail.com>