### What this PR does / why we need it?
1. Use optimized apply_top_k_top_p for NPU platfrom in rejection
sampler; (avoid scatter elements which can reduce ~26ms TPOT with bs=24
per DP)
2. <del>Avoid D2H Synchronization before calling npu_top_k_top_p
introduced by parameter validation which improves inference speed with
`async_scheduling` enabled;</del> In order to elminate the D2H
synchronization introduced by parameter validation before calling
`npu_top_k_top_p`, we directly drop this fused operator since the
performance improvement is not significant compared to async_scheduling
and may bring potential accuracy problem.
3. Refactor the implementation of AscendTopKTopPSampler to align that of
vLLM.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
E2E serving test with combinations of `k=500` and `p=0.95` with
async_scheduling in single node and wide-EP scenarios.
- vLLM version: v0.11.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/83f478bb19489b41e9d208b47b4bb5a95ac171ac
---------
Signed-off-by: linfeng-yuan <1102311262@qq.com>
Co-authored-by: realliujiaxu <realliujiaxu@163.com>
### What this PR does / why we need it?
### Does this PR introduce _any_ user-facing change?
Fix vllm break:
1. [Enable cuda graph for deepepHT, 5.3% throughput improvement, 4.4%
TTFT improvement] (https://github.com/vllm-project/vllm/pull/29558)
Fix Solution: Add the now-necessary `all2all_backend` parameter. The
impact of this parameter on the original `set_splitting_ops_for_v1`
implementation is only that graph mode is disabled in `vllm` if
`deepep_high_throughput` is enabled; it has no effect on the
`vllm-ascend` logic.
2.[Migrate legacy ViT MultiHeadAttention to new MMEncoderAttention
interface ] (https://github.com/vllm-project/vllm/pull/30684)
Fix Solution: The reason why the GPU does not need to convert qkv to 3D
is that the GPU's flash_attention operator is compatible with 3D and 4D
(b s h d and s b ( h d)), but the NPU's flash_attention_unpad operator
only supports 3D (s b ( h d)). Therefore, we need to introduce the
reshape_qkv_to_3d operation.
4.Skip Tencent-Hunyuan/HunyuanOCR test case, as it has following issue
in upgrade vllm code:
https://github.com/vllm-project/vllm-ascend/issues/5297
### How was this patch tested?
Co-authored-by: zxwang <1476209578@qq.com>
- vLLM version: release/v0.13.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: leo-pony <nengjunma@outlook.com>
Signed-off-by: zxwang <1476209578@qq.com>
Co-authored-by: zxwang <1476209578@qq.com>
### What this PR does / why we need it?
efect e2e ci test:
1. tests/e2e/singlecard/pooling/test_embedding.py: remove the eager
parameter and rename test case
2. tests/e2e/singlecard/pooling/test_scoring.py: Rename test cases
3. tests/e2e/singlecard/pooling/test_classification.py: Rename test case
4. tests/e2e/singlecard/test_quantization.py: remove the eager parameter
and chage model to vllm-ascend/Qwen2.5-0.6B-W8A8 and Rename test case
5. tests/e2e/multicard/test_shared_expert_dp.py: Rename test cases
6. tests/e2e/singlecard/test_sampler.py: Rename test cases
7. tests/e2e/singlecard/test_aclgraph_accuracy.py: Rename test cases
8. tests/e2e/multicard/test_offline_inference_distributed.py: Rename
test cases and remove the eager parameter
9. tests/e2e/multicard/long_sequence/test_accuracy.py: Rename test cases
and remove the eager parameter
10. tests/e2e/multicard/long_sequence/test_basic.py: Rename test cases
and remove the eager parameter
11.tests/e2e/multicard/test_expert_parallel.py:remove the eager
parameter
12.tests/e2e/multicard/test_full_graph_mode.py:remove the eager
parameter
13.tests/e2e/multicard/test_ilama_lora_tp2.py:remove the eager parameter
14.tests/e2e/singlecard/spec_decode_v1/test_v1_mtp_correctness.py:remove
the eager parameter
15.tests/e2e/singlecard/spec_decode_v1/test_v1_spec_decode.py:remove the
eager parameter
16.tests/e2e/singlecard/test_aclgraph_accuracy.py:remove the eager
parameter
17.tests/e2e/singlecard/test_camem.py:remove the eager parameter
18.tests/e2e/singlecard/test_ilama_lora.py:remove the eager parameter
19.tests/e2e/singlecard/test_multistream_overlap_shared_expert.py:remove
the eager parameter
20.tests/e2e/singlecard/test_vlm.py:remove the eager parameter
21.tests/e2e/singlecard/test_xli:remove the eager parameter
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: release/v0.13.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
Signed-off-by: hfadzxy <starmoon_zhang@163.com>
### What this PR does / why we need it?
In code files such as`mooncake_connector.py`,
`vllm_config.model_config.hf_config` is used to get the LLM configs.
This approach works for LLMs, but not for multi-modal models. For
multi-modal models, `vllm_config.model_config.hf_text_config` must be
used instead to get the LLM configs.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
Existing UT
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: ApsarasX <apsarax@outlook.com>
### What this PR does / why we need it?
Currently, `torch_npu.npu_grouped_matmul_swiglu_quant` can only support
weight nz, so we need to trans w13_weight, w2_weight to nz forcely.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
This PR deletes `cudagraph_batch_sizes` in `MtpProposer` and reuses the
one in `NPUModelRunner`.
During our deployment of DeepSeek-V3.2 with MTP across machines 2P2D and
conducting AISBench stress testing, an error occurred (see below). After
investigation, we found that
`compilation_config.cudagraph_capture_sizes` is modified by
`adjust_cudagraph_sizes_for_spec_decode` in `NPUModelRunner`. This
modification only updates `cudagraph_batch_sizes` in `NPUModelRunner`
but is not synchronized to `MtpProposer`. After discussion (CC @yiz-liu)
, we believe it is unnecessary to maintain `cudagraph_batch_sizes` in
`MtpProposer`; it should directly use the variable from
`NPUModelRunner`.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: QiuChunshuo <qiuchunshuo@huawei.com>
### What this PR does / why we need it?
Add a control to enable the exponential distribution operator
overlapping with model executing (default is OFF due to this feature
might not perform well on MOE models, i.e. For Qwen3-30B).
Enable async exponential overlapping will provides performance
improvement.
Also, overlapping the exponential operator with module execution can
cover the performance drop introduced by AICPU-version's exponential
operator.
**UPDATE**: (12/12)
Now our overlap will use the same stream that introduced in this pr:
#4908 .
We move the `do_async_exponential` from `model_runner_v1.py` to
`sampler.py`.
Now we are using `additional_config` to enable async exponential:
Add `"enable_async_exponential": 1` in `addition_config`.
Now we **ONLY** support default exponential/AI-CPU exponential, the old
`"enable_async_exponential": 2` option has been aborted to keep
consistency.
### Does this PR introduce _any_ user-facing change?
**YES**, added a new `additional_config` : `"enable_async_exponential":
1`.
When `enable_async_exponential` is set to 1, we enable the async
exponential and overlap with model runner.
When `enable_async_exponential` is set to 0 (default is 0), we disable
the async exponential, but exponential will still running on a different
stream using stream introduced in #4908.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: YuhanBai <yuhan.bai0830@gmail.com>
Signed-off-by: YuhanBai yuhan.bai0830@gmail.com
### What this PR does / why we need it?
Now `VLLM_ASCEND_ENABLE_NZ` will have three options:
0: disable nz;
1: only quant case enable nz;
2: enable nz as long as possible;
And `VLLM_ASCEND_ENABLE_NZ`=1 by default.
All cases are shown in the table below:
| | W4A4 | W4A8 | W8A8 | fp16/bf16 | fp32 |
|---|---|---|---|---|---|
| trans nz | can't support nz | trans nz by default | trans nz by
default | trans nz when VLLM_ASCEND_ENABLE_NZ is 2 | can't support nz |
| transpose | only support not transpose case | only support transpose
case | only support transpose case | linear: only support not transpose
case<br>gmm: only support transpose case | same to fp16/bf16 |
Some exceptional cases:
1. MLAPO op need to do some additional processing on the weights,
including trans nz. If use MLAPO op, some weight will be transformed to
nz forcely;
2. MLA/SFA's weight `W_UV` will be used by op
`torch.ops._C_ascend.batch_matmul_transpose`, and this op can't support
nz currently;
### Does this PR introduce _any_ user-facing change?
Now fp16/bf16 weight will not trans nz by default.
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
vLLM community has integrated their MooncakeConnector. The original
scripts will now find this MooncakeConnector instead of the one from
vLLM-Ascend. All scripts that involve using the MooncakeConnector need
to be modified to another name.
### Does this PR introduce _any_ user-facing change?
Yes, users need to use a new name to load vLLM-Ascend MooncakeConnector.
### How was this patch tested?
By CI.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: nwpu-zxr <zhouxuerong2@huawei.com>
### What this PR does / why we need it?
1. In addition to
[#4168](https://github.com/vllm-project/vllm-ascend/pull/4168),
[#5011](https://github.com/vllm-project/vllm-ascend/pull/5011), this PR
adds two more pattern for AddRmsnormQuant with SP enabled. The key
difference is to insert an additional `maybe_all_gather_and_maybe_unpad`
between `addrmsnorm` and `quantize`.
2. This PR also introduce another api `torch.ops.vllm.quantize`, so that
we pass `input_scale` and `input_scale_reciprocal` at the same time.
This is because `npu_add_rms_norm_quant` and `npu_quantize` requires
different `div_mode`. To avoid introducing additional reciprocal
calculation in runtime, we have to pass both of them to quantize api.
3. Removes redundant `AscendQuantRmsnorm`.
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
This PR aim to implement model runner v2 basic framework in vllm-ascend,
the e2e function is not guaranteed by this pr.
### Does this PR introduce _any_ user-facing change?
use envs.VLLM_USE_V2_MODEL_RUNNER to decide if choose model_runenr_v2.
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: Ronald1995 <ronaldautomobile@163.com>
### What this PR does / why we need it?
We will expose the enabling switch for npugraph_ex to better facilitate
subsequent optimization.
### Does this PR introduce _any_ user-facing change?
Previously, the enable_npugraph_ex switch would trigger an error; now we
have removed the error reporting mechanism to better facilitate
subsequent optimization efforts.
Basic functionalities are available in CANN and torch_npu for Q3, while
advanced optimizations will depend on the Q4 release.
### How was this patch tested?
llm =LLM(
model=model,
enforce_eager=False ,
additional_config={
"enable_npugraph_ex": True
},
compilation_config={
"cudagraph_mode": "FULL_DECODE_ONLY",
"cudagraph_capture_sizes": [16],
},
}
- vLLM version: v0.12.0
- vLLM main:
https://github.com/vllm-project/vllm/commit/ad32e3e19ccf0526cb6744a5fed09a138a5fb2f9
---------
Signed-off-by: p00465316 <panchao13@huawei.com>
Co-authored-by: p00465316 <panchao13@huawei.com>
Co-authored-by: weijinqian0 <1184188277@qq.com>