### What this PR does / why we need it?
Add accuracy nightly test for new models：
PaddlePaddle/ERNIE-4.5-21B-A3B-PT
LLM-Research/Molmo-7B-D-0924
LLM-Research/gemma-2-9b-it
LLM-Research/gemma-3-4b-it
Shanghai_AI_Laboratory/internlm-7b
llava-hf/llava-1.5-7b-hf
- vLLM version: v0.11.2
Signed-off-by: hfadzxy <starmoon_zhang@163.com>
### What this PR does / why we need it?
Support shared expert DP for deepseek_mtp feature.
`shared_expert_dp` requires `SP==True`, with corresponding parameter
restrictions.
Previously, due to the coupling between `shared_expert_dp` and torchair,
and the removal of `deepseek_mtp` in vllm_ascend, shared expert dp of
deepseek_mtp was temporarily removed.
Currently, by performing the `reduce_scatter` on the input of
deepssek_mtp in `mtp_proposer.py`, we ensure that it matches the
dimensions of `input_embedding`, and then perform the `all_gather` on
the output of mtp.
### How was this patch tested?
baseline:
<img width="1184" height="692" alt="image"
src="https://github.com/user-attachments/assets/9680d53a-7b1d-481a-accc-b8f3dae2b9e3"
/>
enable shared_expert_dp and multistream_overlap_shared_expert:
<img width="1167" height="687" alt="image"
src="https://github.com/user-attachments/assets/2531d06b-dfda-4e24-8628-6f4b0f677ddc"
/>
TPOT: 48ms -> 45.4ms
Average TPS per rank: 117.6 -> 126.1
- vLLM version: v0.11.2
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.2
---------
Signed-off-by: chenmenglong <chenmenglong1@huawei.com>
Signed-off-by: zengran <zengran2@huawei.com>
Co-authored-by: zengran <zengran2@huawei.com>
### What this PR does / why we need it?
This PR integrate suffix decoding (https://arxiv.org/abs/2411.04975)
from vllm (https://github.com/vllm-project/vllm/pull/25784)
#
Suffix Decoding is a dynamic n-gram matching method that:
1. Uses suffix trees to generate speculative tokens quickly using branch
frequency counts.
2. Can keep a history of prior model responses, which tends to work very
well with repetitive agentic use cases.
3. Can be dynamically updated with newly generated tokens, and FIFO
eviction of older requests.
#
### Does this PR introduce _any_ user-facing change?
This feature should be implemented as opt-in and remain seamless for
users who do not require suffix speculative decoding.
For users who wish to enable it, they must first install
arctic-inference:
`pip install arctic-inference
`
After installation, the suffix speculative decoding feature can be
enabled using the following speculative config:
`--speculative_config '{"method": "suffix", "num_speculative_tokens":
5}'
`
### How was this patch tested?
This PR is currently being tested on vLLM
main:83f478bb19
with PR https://github.com/vllm-project/vllm/pull/25784
In our previous testing, suffix decoding achieved a 13%-30% throughput
improvement over n-gram on the sonnet dataset, tested on vllm-ascend
v0.9.1 with concurrency ranging from 2 to 40.
- vLLM version: v0.11.2
---------
Signed-off-by: fluctlux <38945811+fluctlux@users.noreply.github.com>
### What this PR does / why we need it?
The previous implementation of the flashcomm2 communication domain did
not consider pp(pipeline parallel), which caused problems when enabling
pp and flashcomm2. This PR fixes this issue.
- vLLM version: v0.11.2
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.2
---------
Signed-off-by: zzhx1 <zzh_201018@outlook.com>
Co-authored-by: Levi-JQ <yujinqi2@huawei.com>
### What this PR does / why we need it?
Add a new fusion ops to custom_op, which can cobime the torch.bmm() and
transpsose to achieve better peformance. This ops is used in mla_v1 to
replace the bmm and transpose
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.2
---------
Signed-off-by: hust17yixuan <303660421@qq.com>
Ascend scheduler was added for non chunk prefill case before, since that
the npu ops didn't work well with chunked prefill.
Now the ops with chunked prefill work better, it's time to remove the
ascend scheduler to use vLLM default scheduler.
- vLLM version: v0.11.2
---------
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
Fix model run _npu_flash_attention in _forward_prefill_no_cache hang
issue, it was caused by wrong attention mask dtype.
### How was this patch tested?
Yes, tesed on Qwen2.5-VL and Qwen2.5-Omni
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: Ting FU <futing10@huawei.com>
### What this PR does / why we need it?
qwen3-next suppot triton chunk_gated_delta_rule ops
### co-owners
@OsirisDuan
- vLLM version: v0.11.2
Signed-off-by: shiyuan680 <917935075@qq.com>
### What this PR does / why we need it?
1.In short, we renamed the existing MooncakeStoreConnector to
AscendStoreConnector and extracted the storage engine interaction logic
into a new Backend class.
Associated RFC：https://github.com/vllm-project/vllm-ascend/issues/4329
2.Fixed the issue where the number of input parameters for the connector
was incorrect, introduced in vllm 0.11.2
### Does this PR introduce _any_ user-facing change?
change MooncakeStoreConnector to AscendStoreConnector
### How was this patch tested?
- vLLM version: v0.11.2
---------
Signed-off-by: fems14 <1804143737@qq.com>
### What this PR does / why we need it?
This PR introduces support for adding custom CANN `aclnn` ops to
`vllm-ascend`, allowing users to define and use their own custom
operators.
Key changes include:
- Building and installing custom ops into the `vllm-ascend`-specified
directory
- Binding the `aclnn` op interface to the `torch.ops._C_ascend` module
- Enabling invocation of these ops within `vllm-ascend`
This PR includes a sample custom op:
`aclnnGroupedMatmulSwigluQuantWeightNzTensorList`, which is adapted from
the CANN operator
[`aclnnGroupedMatmulSwigluQuantWeightNZ`](https://www.hiascend.com/document/detail/zh/canncommercial/83RC1/API/aolapi/context/aclnnGroupedMatmulSwigluQuantWeightNZ.md).
Its input parameters `weight` and `weight_scale` now accept
`list[torch.Tensor]` (i.e., `at::TensorList`).
### Does this PR introduce _any_ user-facing change?
No.
- vLLM version: v0.11.2
---------
Signed-off-by: QianChenxi <chenxi.qian.cq@outlook.com>
### What this PR does / why we need it?
- [x] Patch `Qwen2_5_VisionAttention` with
`AscendQwen2_5_VisionAttention`.
- [x] Replace `AscendQwen2_5_VisionTransformer` with
`Qwen2_5_VisionTransformer` in vllm.
- [x] Move padding logic (q/k/v and cos/sin) before FA to `forward()` of
`Qwen2_5_VisionAttention`.
- [x] Covert `cu_seqlens` in `Qwen2_5_VisionAttention` from cumulative
form to intervals and move it to cpu (compatible for npu FA).
- [x] Remove Qwen2.5-VL modeling files.
- [x] Remove Qwen2.5-VL (without padding) modeling files.
- [x] Remove related UT.
- [x] Make `set_forward_context` pluggable when getting MM embedding.
Find more details at https://github.com/vllm-project/vllm/pull/29388.
- [x] Simplify padding logic for FA.
- [x] Add patch for https://github.com/vllm-project/vllm/pull/28798.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- [x] Functional test (eager mode)
- [x] Functional test (graph mode)
- [x] Benchmark
- vLLM version: v0.11.2
---------
Signed-off-by: shen-shanshan <467638484@qq.com>
### What this PR does / why we need it?
While using the LLM Compressor quantization tool from the VLLM community
to generate quantized weights, the VLLM Ascend engine needs to be
adapted to support the compressed tensors quantization format.
1. Add AscendCompressedTensorsConfig to replace CompressedTensorsConfig
in vllm.
2. Support CompressedTensorsW8A8 static weight.
- weight: per-channel, int8, symmetric; activation: per-tensor, int8,
symmetric.
4. Support CompressedTensorsW8A8Dynamic weight.
- weight: per-channel, int8, symmetric; activation: per-token, int8,
symmetric, dynamic.
5. Modify the override_quantization_method in AscendQuantConfig.
Co-authored-by: taoqun110 taoqun@huawei.com
Co-authored-by: chenxi-hh chen464822955@163.com
- vLLM version: v0.11.2
---------
Signed-off-by: LHXuuu <scut_xlh@163.com>
Signed-off-by: chenxi-hh <chen464822955@163.com>
Signed-off-by: chenxi-hh <32731611+chenxi-hh@users.noreply.github.com>
Co-authored-by: chenxi-hh <chen464822955@163.com>
Co-authored-by: chenxi-hh <32731611+chenxi-hh@users.noreply.github.com>
### What this PR does / why we need it?
Upgrade cann to 8.3rc2
### Does this PR introduce _any_ user-facing change?
Yes, docker image will use 8.3.RC2
- vLLM version: v0.11.2
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.2
---------
Signed-off-by: MrZ20 <2609716663@qq.com>
This PR introduces the `EXEC_NPU_CMD` macro, serving as an adapter layer
to simplify the invocation of `aclnn` operators on Ascend NPUs.
**Key Changes:**
* **Adapter Layer:** Added `EXEC_NPU_CMD` macro and related dependencies
to standardize `aclnn` calls.
* **Operator Support:** Integrated `grouped_matmul_swiglu_quant` as a
reference implementation to demonstrate the usage of the new macro.
---
- vLLM version: v0.11.2
---------
Signed-off-by: SlightwindSec <slightwindsec@gmail.com>
### What this PR does / why we need it?
This patch mainly doing the following things:
1. Make k8s/lws optional for multi-node testing, allowing developers to
run multi-node tests locally by actively passing in the IP addresses of
all nodes.
2. Allows passing a custom proxy script path in the config file to load
the proxy.
- vLLM version: v0.11.2
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
Currently, there are two paths to judge the chip type in code,
`get_ascend_soc_version` use `get_soc_version` api in torch_npu, and
`is_310p` `use _build_info.__soc_version__`, which generate when
install. We need to unify the two paths.
We need to unify these codes based on the following points:
1. We need to ensure consistency in chip type judgment between compiling
and running states;
2. In compiling state, we need chip type to complete op's compilation,
but in running state, we only need device
type(910B/910_93/310P/910_95/etc) to make code branch judgement;
3. In compiling state, torch_npu may not have been installed yet, so we
can't use torch_npu's api.
Based on the above points, we have made the following changes:
1. When user set env `SOC_VERSION`, use it; when not set, query
soc_version by `npu-smi`;
2. generate device_type based on soc_version when compiling, and write
`__device_type__` instead of `__soc_version__` in `_build_info.py`;
3. In running state, use `__device_type__` to judge code branch.
### Does this PR introduce _any_ user-facing change?
When not set env `SOC_VERSION`, it will not be `ASCEND910B1` by default,
we will query soc_version by `npu-smi`. And env `SOC_VERSION` must be in
the list `soc_to_device` in `setup.py`.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
Delete useless comments.
### Does this PR introduce _any_ user-facing change?
No
- vLLM main:
2918c1b49c
Signed-off-by: GDzhu01 <809721801@qq.com>
The main purposes of this PR are as follows:
1. Remove the multicast-related code;
Reason:
1. In the scenario like a2 Dual-System Back-to-Back Networking，the
performance is worse than all_gather. Before the modification, in e2e
test, it was 3 tps; after the modification, it is 10 tps.
2. At the same time, we usually enable the SP feature，it is consistent
with the current logic.
3. The advantage of broadcast communication lies in the fact that it
does not suffer from uneven DP load and does not require the prefill ACL
graph to be enabled. But we support prefill Acl graph recently.
So we think there is no need to maintain the multicast as one choice in
moe communication.
Performance benefits are as follows:
When not enable_flashcomm1, TTFT remains relatively stable at around
43000ms, which is approximately 15000ms faster than before the
modification.
When enable_flashcomm1, there is no diffenence, TTFT remains relatively
stable at around 29000ms.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: weijinqian_v1 <weijinqian@huawei.com>
Signed-off-by: weijinqian0 <1184188277@qq.com>
Co-authored-by: weijinqian_v1 <weijinqian@huawei.com>
### What this PR does / why we need it?
Due to the inconsistency between the attention operators used in eager
mode and graph mode, the accumulation order of the operator cannot be
guaranteed to be deterministic. Therefore, we modify the test to compare
with given outputs.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
There is a lot hack code for v0.11.0, which makes the code hard to
upgrade to newer vLLM version. Since v0.11.0 will release soon. Let's
drop v0.11.0 support first. Then we'll upgrade to v0.11.2 soon.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
This PR updates the acc standard for deepseek mtpx cases, according to
inner standard
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
In [#26016](https://github.com/vllm-project/vllm/pull/26016), vllm
change the `cudagraph_capture_sizes` to be in ascending order. This PR
fixes related issues caused by this.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: Angazenn <supperccell@163.com>
This PR is used to fix mooncake_connector in pcp/dcp case. When
executing function update_done_task_count, it is necessary to ensure
that both pcp/dcp and TP ranks have finished transferring KV cache.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: wangxiaochao <w00642655@china.huawei.com>
Co-authored-by: wangxiaochao <w00642655@china.huawei.com>
### What this PR does / why we need it?
The current community lacks unit tests (UT) for files such as
torchair_worker, mtp_proposer, and model_runner. Therefore, UT coverage
for these files needs to be added.
### Does this PR introduce _any_ user-facing change?
NO
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: CodeNine-CJ <chenjian343@huawei.com>
### What this PR does / why we need it?
Redundant experts bugfix
### Does this PR introduce _any_ user-facing change?
After configuring the path for experts_map, users do not need to
configure iinit_redundancy_expert.
### How was this patch tested?
The accuracy of EPLB was tested with and without the use of redundant
experts.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: shenchuxiaofugui <1311027364@qq.com>
### What this PR does / why we need it?
Support the Qwen3-Next-80B-A3B-Instruct quantization model and Fix the
NZ issue. Triton kernel doesn't support data format nz, thus we skip
converting weight to nz on layer `conv1d`
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: IncSec <1790766300@qq.com>
### What this PR does / why we need it?
Add ACL graph capture/replay DP test, this is a imprved version of #3886
Restructures the multi-card ACL graph test for improved clarity,
robustness, and accuracy.
Key improvements include:
- Replaces fragile `sys.settrace` and manual patching with a clean,
reusable spy installer using `unittest.mock.patch`.
- Introduces more precise metrics by tracking
`NPUModelRunner.execute_model` and `_dummy_run` calls directly.
- Rewrites assertions to be more accurate and provides clear
explanations for the expected counts of graph captures, replays, model
executions, and dummy runs.
- Simplifies the overall test structure by separating the worker logic
into a dedicated function.
- Removes a long, unnecessary sleep at the end of the test.
- Expands test coverage by adding a larger `max_tokens` parameter.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
None.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: lilinsiman <lilinsiman@gmail.com>
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
Co-authored-by: lilinsiman <lilinsiman@gmail.com>
### What this PR does / why we need it?
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: GDzhu01 <809721801@qq.com>
### What this PR does / why we need it?
Currently, the MTP model still runs in eager in full graph mode. This PR
adapts the MTP with the full graph capture and execution. When the graph
mode is set to "FULL_DECODE_ONLY", the MTP will run in full-graph to
improve the performance.
The change in both disable_padded_drafter_batch is True and False case
include:
1. Add _mtp_graph_params in acl_graph.py to isolate the data of main
model and the data of MTP.
2. Padding some metadata in mla_v1.py when in fullgraph mode.
3. Fixed the essential data address that will be used in model.forward.
4. Adapted according to the aclgraph capture framwork:
1). Rebuild MTP model with ACLGraphWrapper.
2). Add common attn metadata when start capture in MTP dummy_run.
3). Add common attn metadata update in MTP.
4). Addapted data update when num_speculative_tokens > 1.
5. Add a patch of MTP to adapt vllm v0.11.0.
Existing Issues:
1. When disable_padded_drafter_batch=True and running in FullGraph mode,
the data of the first-round requests in MTP is abnormal. We need to
identify the cause subsequently.
2. When disable_padded_drafter_batch=False and running in FullGraph
mode, the acceptance rate of the second and third tokens will decrease
(For example, if we set the num_speculative_tokens=3, the acceptance
rate of first token is 90%, the second is only 50% lower than 60%, the
third is only 20% lower than 30%). The reason is that the data processed
after the model runs does not match. This is a problem from another PR.
It works fine in eager and PIECEWISE mode, but has problem in FullGraph
mode. Once we have a solution, we will submit a bugfix.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
### What this PR does / why we need it?
add mla_v1.py and mla.py ut
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
`pytest tests/ut/attention/test_mla_v1.py`
`pytest tests/ut/models/test_mla.py`
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: GDzhu01 <809721801@qq.com>
### What this PR does / why we need it?
Add tests for the multi-node DeepSeek-V2-Lite network in GE Graph mode,
and supplement the end-to-end (e2e) tests for the MLA and NZ features of
this network.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: CodeNine-CJ <chenjian343@huawei.com>
### What this PR does / why we need it?
avoid mrope fusion op when running qwen2.5-vl on a+x machine
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
Test text VQA accuracy on G8600 with aisbench
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: 李少鹏 <lishaopeng21@huawei.com>
remove get_metadata_cls. It's only used for V0 engine and has been removed from vLLM already.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
