### What this PR does / why we need it?
Currently, there are two paths to judge the chip type in code,
`get_ascend_soc_version` use `get_soc_version` api in torch_npu, and
`is_310p` `use _build_info.__soc_version__`, which generate when
install. We need to unify the two paths.
We need to unify these codes based on the following points:
1. We need to ensure consistency in chip type judgment between compiling
and running states;
2. In compiling state, we need chip type to complete op's compilation,
but in running state, we only need device
type(910B/910_93/310P/910_95/etc) to make code branch judgement;
3. In compiling state, torch_npu may not have been installed yet, so we
can't use torch_npu's api.
Based on the above points, we have made the following changes:
1. When user set env `SOC_VERSION`, use it; when not set, query
soc_version by `npu-smi`;
2. generate device_type based on soc_version when compiling, and write
`__device_type__` instead of `__soc_version__` in `_build_info.py`;
3. In running state, use `__device_type__` to judge code branch.
### Does this PR introduce _any_ user-facing change?
When not set env `SOC_VERSION`, it will not be `ASCEND910B1` by default,
we will query soc_version by `npu-smi`. And env `SOC_VERSION` must be in
the list `soc_to_device` in `setup.py`.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: zzzzwwjj <1183291235@qq.com>
The main purposes of this PR are as follows:
1. Remove the multicast-related code;
Reason:
1. In the scenario like a2 Dual-System Back-to-Back Networking，the
performance is worse than all_gather. Before the modification, in e2e
test, it was 3 tps; after the modification, it is 10 tps.
2. At the same time, we usually enable the SP feature，it is consistent
with the current logic.
3. The advantage of broadcast communication lies in the fact that it
does not suffer from uneven DP load and does not require the prefill ACL
graph to be enabled. But we support prefill Acl graph recently.
So we think there is no need to maintain the multicast as one choice in
moe communication.
Performance benefits are as follows:
When not enable_flashcomm1, TTFT remains relatively stable at around
43000ms, which is approximately 15000ms faster than before the
modification.
When enable_flashcomm1, there is no diffenence, TTFT remains relatively
stable at around 29000ms.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: weijinqian_v1 <weijinqian@huawei.com>
Signed-off-by: weijinqian0 <1184188277@qq.com>
Co-authored-by: weijinqian_v1 <weijinqian@huawei.com>
There is a lot hack code for v0.11.0, which makes the code hard to
upgrade to newer vLLM version. Since v0.11.0 will release soon. Let's
drop v0.11.0 support first. Then we'll upgrade to v0.11.2 soon.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
Redundant experts bugfix
### Does this PR introduce _any_ user-facing change?
After configuring the path for experts_map, users do not need to
configure iinit_redundancy_expert.
### How was this patch tested?
The accuracy of EPLB was tested with and without the use of redundant
experts.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: shenchuxiaofugui <1311027364@qq.com>
remove get_metadata_cls. It's only used for V0 engine and has been removed from vLLM already.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
The current library only supports the FullDecodeOnly graph mode, which
enables full graph execution during the decode. This PR extends support
to allow full graph execution in both the prefill and decode, referred
to as FULL graph mode.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Drop VLLM_USE_V1 usage. This env has been removed from vLLM already.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
The code bug caused an empty bubble. When the npu_paged_cache_load
operator was called, it forcibly transferred seq_len2 to the device,
which triggered synchronization and interrupted the CPU operator's
launch stream.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: underfituu <hzhucong@163.com>
### What this PR does / why we need it?
correct bug to fix the value of max_num_tokens
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: zouyida2052 <zouyida2002@gmail.com>
### What this PR does / why we need it?
1. Revert [bugfix for mtp in
fullgraph](0948483642)
and support it when vllm supports
2. raise error when cudagraph_capture_sizes can't be an integer multiple
of uniform_decode_query_len
3. bugfix when max_num_seqs=14 in mtp=2 scenario
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: zouyida2052 <zouyida2002@gmail.com>
This is the follow-up PR to PR #3189, which continues to refactor sfa
into mla and finally remove deepseek_v3_2.py. This is the last PR of
deepseek modeling refactoring. After this, all deepseek-related model
codes are removed from vllm_ascend.
FurtherMore, after this PR deepseek v3.2 can run chunk-prefill with
correct accuracy.
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: whx-sjtu <2952154980@qq.com>
### What this PR does / why we need it?
1. Refactor the file `mtp_proposer.py`, splits torchair related codes
into `mtp_torchair_proposer.py`
2. According to https://github.com/vllm-project/vllm/pull/24539,
implements padded speculative decoding as described in
https://github.com/vllm-project/vllm/issues/21984.
### Does this PR introduce _any_ user-facing change?
User can use `disable_padded_drafter_batch` to disable/enable padded
speculation, default is `False`.
offline example:
```
speculative_config={"method": "deepseek_mtp", "num_speculative_tokens": 1, "disable_padded_drafter_batch": False}
```
### How was this patch tested?
- [x] egaer with pad/unpad:
- [x] aclgraph with pad/unpad
- [x] torchair with pad/unpad
performance test of deepseek-r1 with tp16、dp1
aclgraph with pad ITL: 168ms
aclgraph with unpad ITL: 169ms
original: 178ms
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
### What this PR does / why we need it?
To adapt the torch_npu version to avoid the precision problem of
torchair deepseek. The torch_npu version may result in the different
branches in the ops register, the rms_norm ops has two branches
according to the verson_check, this pr unify the rms_norm in torchair by
patching quant_rms_norm to rms_norm to fix the accuracy issue in torchair scenario
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
Signed-off-by: hust17yixuan <303660421@qq.com>
### What this PR does / why we need it?
After refactoring vllm_ascend/models and FusedMoE, we are unable to pass
`gate` from deepseekv2.py to `AscendFusedMoE.forward`, which will result
in error when running deepseek v3/r1 with allgather.
Hence, this pr removes `gate` related computations from FusedMoE module
in eager/aclgraph mode.
### Does this PR introduce _any_ user-facing change?
`rm_router_logits` is deprecated in eager/aclgraph.
### How was this patch tested?
e2e & ut
- vLLM version: v0.11.0rc3
- vLLM main:
https://github.com/vllm-project/vllm/commit/releases/v0.11.1
Signed-off-by: Pr0Wh1teGivee <calvin_zhu0210@outlook.com>
### What this PR does / why we need it?
Remove codes of dbo.
Currently, vLLM has supported dbo with pr:
https://github.com/vllm-project/vllm/pull/23693.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
This PR refactors the Ascend attention implementation to align with
vLLM's core interfaces, simplifying the code and improving
maintainability.
### Key Changes:
* **Align with vLLM's Attention Interface**: The `forward` method
signature in `AscendAttentionBackendImpl` now matches the base
`AttentionImpl` in vLLM, removing the custom `trace_flag`.
* **Enable Opaque Attention Operator**: By adding `opaque_attention_op`
to `AscendPlatform`, we allow vLLM to wrap our attention kernel in its
standard `vllm.unified_attention_with_output` operator. This avoids the
need for a custom call path.
* **Remove Obsolete Code**:
* The custom op `vllm.unified_ascend_attention_with_output` has been
deleted as it is now redundant.
* The `trace_flag` and its associated logic were removed, reducing code
complexity.
* An outdated quantization branch within the attention implementation
was cleaned up.
* **Improve Readability**: Renamed output variables (`output` vs.
`intermediate_output`) and added comments to clarify the in-place nature
of the attention output.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
No extra tests needed.
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
Check all expert maps when using muilty instance.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
Qwen 235B in double A3.
case1：master has expert map, slave has not expert map.
case2: master has expert map, slave has error expert map.
case3: master has expert map,slave has correct expert map.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
The #3624 PR fix the precision of deepseek torchair, but don't consider
the limitation of torch compile which results in the recompile, This PR
fixs this problem
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: hust17yixuan <303660421@qq.com>
### What this PR does / why we need it?
The precision of deepseek torchair is broken by #3465 , which due to the
origin patch or rmsnorm in torchair. This PR fixes the precision of
deepseek torchair
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: hust17yixuan <303660421@qq.com>
### What this PR does / why we need it?
Fix mtp tochair bug cuased by #2719
Since FIA need extra space for padding, we need to enforce
`self.max_num_seqs > self.scheduler_config.max_num_seqs` in KV consumer
+ MTP
This means that, `self.max_num_seqs` **>** the actual maximum requests
(`self.scheduler_config.max_num_seqs`)
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
### What this PR does / why we need it?
we notice that `patch_main` is never used. Usually the patch is for all
version. And if it's for specified version, we can use `vllm_version_is`
instead. So let's remove the useless sub folder in patch module to make
it clear.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
**Problem Description:**
The existing implementation for the w4a8-dynamic linear method only
supports the old quantization format from msmodelslim. When attempting
to load models quantized with the new version, vLLM encounters errors
due to mismatched tensor shapes and unprocessed quantization parameters.
Relavant issues:
- https://github.com/vllm-project/vllm-ascend/issues/3192
- https://github.com/vllm-project/vllm-ascend/issues/3152
**Proposed Changes:**
1. Add support for w4a8 dynamic(new format) in
AscendW4A8DynamicLinearMethod and TorchairAscendW4A8DynamicLinearMethod
2. Add unit tests and e2e tests for w4a8 dynamic new and old format
models
<details>
<summary><b>details</b></summary>
1. **Support for new w4a8-dynamic format:**
* Detects quantization format by reading the "version" field in
quant_description to ensure backward compatibility.
* Handles the new pre-packed weight format (`2x int4` in an `int8`),
which has a halved dimension. It tells the vLLM loader how to unpack it
using `_packed_dim` and `_packed_factor`.
* Supports the new `scale_bias` parameter, setting its shape based on
the layer type, as required by msmodelslim. For api consistency and
future use, the `layer_type` parameter was also added to other
quantization methods.
* Updates the weight processing logic: new format weights are handled
with `.view(torch.int32)` since they're pre-packed, while old ones are
processed with `npu_convert_weight_to_int4pack`.
2. **New unit and E2E tests:**
* Added unit tests that verify the logic for both the old and new
formats.
* Split the distributed E2E test to confirm that both old and new format
models work correctly.
</details>
Theoretically, these changes will provide support for all common new
version w4a8(dynamic) models from msmodelslim.
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
I implement relevant unit tests and e2e tests and test the changes with
following commands:
```bash
# unit tests
python -m pytest tests/ut/quantization/test_w4a8_dynamic.py tests/ut/torchair/quantization/test_torchair_w4a8_dynamic.py -v
# e2e tests
pytest tests/e2e/singlecard/test_quantization.py -v -s
pytest tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen3_W4A8DYNAMIC_new_version -v -s
pytest tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_Qwen3_W4A8DYNAMIC_old_version -v -s
pytest tests/e2e/multicard/test_offline_inference_distributed.py::test_models_distributed_DeepSeek_W4A8DYNAMIC -v -s
```
I also tested Hunyuan-1.8B-Instruct quantized with the new w4a8-dynamic
format:
```
vllm serve ./models/Hunyuan-1.8B-Instruct-quantized --gpu-memory-utilization 0.96 --quantization ascend --max-model-len 9600 --seed 0 --max-num-batched-tokens 16384
```
All tests mentioned passed locally.
**NOTE: I use quantization model from my own repo in
test_offline_inference_distributed.py**. Here is the description:
[Anionex/Qwen3-1.7B-W4A8-V1](https://modelscope.cn/models/Anionex/Qwen3-1.7B-W4A8-V1/summary)
(including quantization steps).This should be replaced by a model in
vllm-ascend ci modelscope repo.
Thanks for reading!
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Anionex <1005128408@qq.com>
### What this PR does / why we need it?
The `force_attention` parameter is designed for flash infer kernel
warmup, we don't actually need it on Ascend device (at least for
now).And it tends to make things more complicated. So we replace the
`force_attention` parameter with `aclgraph_runtime_mode` in the
attention metadata creation logic.
This change makes the control flow more explicit by directly using the
graph runtime mode to determine how to build attention metadata, rather
than relying on an intermediate boolean flag. This simplification
removes redundant logic and clarifies the conditions for building
attention metadata for full decode graph mode.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
DP + `FULL_DECODE_ONLY` + online serving.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
Port #1916 and #2157 to master branch to fuse operators in deepseek moe
layers, which can reduce scheduling overhead on devices. Note that this
feature is valid only when `tp_size = 1` and
`multistream_overlap_shared_expert` is enabled with torchair graph mode.
### Does this PR introduce _any_ user-facing change?
Users can enable this feature with `--additional-config
'{"torchair_graph_config":{"enabled":true, "enable_super_kernel":true},
"multistream_overlap_shared_expert":true}'`.
### How was this patch tested?
E2E deepseek serving with 2P1D disaggregated prefill scenarios.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: linfeng-yuan <1102311262@qq.com>
### What this PR does / why we need it?
Using non-blocking operations for device-to-host transfers can lead to
data corruption in later steps. The CPU tensor is accessed right after
the transfer is triggered, but the transfer might not be complete yet.
As a result, the data could be wrong. This problem was seen in the A3
environment during `profile_run`.
### How was this patch tested?
CI pass.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: Jade Zheng <zheng.shoujian@outlook.com>
This PR deletes model codes of deepseek_v2 and deepseek_v3 to reuse the
model file from vLLM.
vLLM Ascend now uses custom ops register way instead of model file
hard-coding.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: whx-sjtu <2952154980@qq.com>
### What this PR does / why we need it?
when using dynamic eplb, patch v1 executor to avoid create child process
failed.
### How was this patch tested?
deepseek in v3.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
Optimize torchair kv_consumer padding logic. Only pad when it is spec
decoding
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
This PR adds support for redundant experts in the EPLB.
Key points:
- Use global_num_experts = num_experts + num_redundant_experts
consistently.
- Backward compatible when num_redundant_experts=0.
Tested
On a 16-rank setup (W8A8) with static EPLB and expert_map_path,
verifying router logits shape and successful requests.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: yechao237 <yechao20180411@gmail.com>
### What this PR does / why we need it?
In memory of https://github.com/vllm-project/vllm-ascend/pull/2610 and
#3449 Fix Mtp torchair pd bug.
In the pd Disaggregation scenario, the first token of the inference
after the d node receives the kv follows the eager mode.
Fixes:
Running with MTP torchair graph mode with Prefilling Decoding
Disaggregation , if all requests processed by the D node are requests
just transmitted from the P node, it will break the torchair graph.
Reason: During PD Disaggregation , the P node only transmits the KV
cache and prompt to the D node, not the actual tokens inferred (neither
the main model tokens nor the MTP tokens are transmitted). Therefore,
the D node will treat this request as one without MTP tokens for
inference (seq_len=1).
The community does not have graph mode issues because the community's
attention has a seq_len=1 for each batch during the decode phase.
We have issues because the graph mode pads according to processing 2
tokens per request. When there are some seq_len=1 and some seq_len=2,
padding is done at the end. If all requests received by the D node are
seq_len=1, padding cannot be performed normally according to the
attention's fia operator constraints.
Solution:
The kv consumer uses extra torchair graph padding to avoid breaking FIA
graph constrains (The one this PR implemented).
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
This reverts commit b0ae203e72.
### What this PR does / why we need it?
The fix is not ready yet, conflict with #3411 need to revert first. Will
fix this issue later
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
### What this PR does / why we need it?
In memory of https://github.com/vllm-project/vllm-ascend/pull/2610
In the pd Disaggregation scenario, the first token of the inference
after the d node receives the kv follows the eager mode.
Fixes:
Running with MTP torchair graph mode with Prefilling Decoding
Disaggregation , if all requests processed by the D node are requests
just transmitted from the P node, it will break the torchair graph.
Reason: During PD Disaggregation , the P node only transmits the KV
cache and prompt to the D node, not the actual tokens inferred (neither
the main model tokens nor the MTP tokens are transmitted). Therefore,
the D node will treat this request as one without MTP tokens for
inference (seq_len=1).
The community does not have graph mode issues because the community's
attention has a seq_len=1 for each batch during the decode phase.
We have issues because the graph mode pads according to processing 2
tokens per request. When there are some seq_len=1 and some seq_len=2,
padding is done at the end. If all requests received by the D node are
seq_len=1, padding cannot be performed normally according to the
attention's fia operator constraints.
Solution:
The kv consumer uses extra torchair graph padding to avoid breaking FIA
graph constrains (The one this PR implemented).
The kv producer provides the correct tokens to the kv consumer, so that
our graph mode constraints are not broken, and all logic is the same as
the PD mixed deployment . Since we are using the community scheduler,
the modification requires patching the vllm scheduler, but
theoretically, performance should be better. (Maybe later )
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
### What this PR does / why we need it?
Adapt deepseek-v3.2 to vllm 0.11.0, removing the useless patch.
The final goal is to remove all the patches and align the code arch to
vllm, thus we need to do the following work in next prs.
TODO:
- [x] remove patch on attention spec
- [ ] refactor the kvcache creation logic
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
1. CI passed with existing test.
2. Test pass with deepseek-v3.2-exp
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: MengqingCao <cmq0113@163.com>
What this PR does / why we need it?
1.Record expert map without dynamic eplb.
2.Add export PYTHONOPTIMIZE=1 when using dynamic eplb.
3.change eplb doc
Does this PR introduce any user-facing change?
How was this patch tested?
Qwen3_moe in A3.
- vLLM version: v0.11.0
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
Avoid printing some warning msg as below :
UserWarning: To copy construct from a tensor, it is recommended to use
sourceTensor.clone().detach ...
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: SunnyLee219 <3294305115@qq.com>
### What this PR does / why we need it?
when infer deepseek mtp layer with multistream_moe, we should pass a
boolean to evaluate this feature and fix bugs when we are in mtp layer
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: zouyida2052 <zouyida2002@gmail.com>
### What this PR does / why we need it?
Fix the issue of missing NZ conversion for quantized weights in GMM
after moe_dispatch operator in torchair scenario, which does not involve
aclgraph & single scenarios.
### How was this patch tested?
vllm serving passed with lower latency (~5ms TPOT with bs_per_rank=28 &
ep_size=32)
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: linfeng-yuan <1102311262@qq.com>
### What this PR does / why we need it?
Currently, when executing to the Linear layer of models in vLLM-Ascend,
the weights format is ND in unquantized case and skipped ascend case.
This PR supplements the execution logic for Linear layer. We use a new
global variable: VLLM_ASCEND_ENABLE_NZ. When VLLM_ASCEND_ENABLE_NZ=1 and
CANN version is 8.3, the weights of the Linear layer will be converted
to FRACTAL_NZ, in both unquantized case and skipped ascend case. We also
use VLLM_ASCEND_ENABLE_NZ to control the existing NZ conversion, such as
w8a8-quantized case.
### Does this PR introduce _any_ user-facing change?
Add a new global variable VLLM_ASCEND_ENABLE_NZ. If you want to use NZ
format, you should set VLLM_ASCEND_ENABLE_NZ=1.
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
This PR will accomplish the following tasks:
**optimize SP**
In the old version implementation, the first layer was all_reduce, which
used rms to split chunks. We changed it to perform reduce_scatter on the
embedding side, replace one all_reduce operation and one chunk with one
reduce_scatter operation.
**Support qwen3 next**
Since Qwen3 Next includes a linear attention module, the prefix name of
this module cannot take effect directly.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: weijinqian_v1 <weijinqian@huawei.com>
Co-authored-by: weijinqian_v1 <weijinqian@huawei.com>
### What this PR does / why we need it?
When using dynamic eplb, moe load is not imported. We fix this problem
by modifying the return value of hidden states in torchair.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
DeepseekV3 in A3.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: daishixun <dsxsteven@sina.com>
### What this PR does / why we need it?
When using dynamic eplb,it will be blocking by nz tensor.We fix these
prolems by clone src tensor and recv tensor.
### Does this PR introduce any user-facing change?
### How was this patch tested?
Qwen3_moe in A3.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
when ops torchair_fused_experts_with_mc2 is called, we need pass a tp
group, but now it only pass when quantized scenario, we need also pass
it when unquantized.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: zouyida2052 <zouyida2002@gmail.com>
