### What this PR does / why we need it?
Supports generalized FlashComm2 optimization, which reduces
communication overhead, decreases RmsNorm computation, and saves one
AllGather step by replacing Allreduce operations in the Attention module
with pre-AlltoAll and post-AllGather operations (used in combination
with FlashComm1). This feature is enabled during the Prefill phase and
is recommended to be used together with FlashComm1, delivering broad
performance improvements, especially in long sequence scenarios with
large tensor parallelism (TP) configurations. Benchmark tests show that
under TP16DP1 configuration, it can improve the prefill performance of
the DeepSeek model by 8% on top of FlashComm1.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: zzhxx <2783294813@qq.com>
Signed-off-by: Levi-JQ <yujinqi2@huawei.com>
Co-authored-by: Levi-JQ <yujinqi2@huawei.com>
Co-authored-by: zzhxx <2783294813@qq.com>
### What this PR does / why we need it?
This PR adds some qwen3-235b-w8a8 cases qwen3-30b-w8a8 cases, we need
test them daily
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
by running the test
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
enable sleepmode level2 e2e test and add the check logic to ensure the
nz is not enabled.
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
use e2e tests
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangx700 <wangxin700@huawei.com>
### What this PR does / why we need it?
This pr fixes ci on eplb
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
Adapts mtp function to Qwen3-next.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: drslark <slarksblood@qq.com>
### What this PR does / why we need it?
Since we have upgraded to CANN 8.3rc1, we will no longer use the
privately maintained Mooncake repository, but instead use the official
release released by Mooncake:
https://github.com/kvcache-ai/Mooncake/releases/tag/v0.3.7.post2 .
Next step: this is only a temporary solution. We will integrate mooncake
into the vllm-ascend base image later for easier use. see
https://github.com/vllm-project/vllm-ascend/pull/3989
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
This PR updates the acc test standard for some cases, we need it to
better maintain acc
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
by running the test
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
move quant before allgather in Allgather EP, rely on
https://github.com/vllm-project/vllm-ascend/pull/3334
Deepseek R1 W8A8 performance on A2 with
`HCCL_ALGO="level0:NA;level1:pipeline"`:
| Seq length | Mean TTFT (ms) main | Mean TTFT (ms) this PR |
|----------|----------|----------|
| 4k | 375.21 | 364.99 |
| 16k | 1465.23 | 1421.75 |
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: realliujiaxu <realliujiaxu@163.com>
### What this PR does / why we need it?
This PR adds full graph for multimodal nightly test, we need to maintain
this senario
### How was this patch tested?
by running the test
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
Add accuracy test for multiple models：
- Meta_Llama_3.1_8B_Instruct
- Qwen2.5-Omni-7B
- Qwen3-VL-8B-Instruct
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: MrZ20 <2609716663@qq.com>
### What this PR does / why we need it?
Add accuracy test for qwen3-8b-w8a8
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
Signed-off-by: hfadzxy <starmoon_zhang@163.com>
### What this PR does / why we need it?
This PR upgrade CANN from 8.2rc1 to 8.3rc1 and remove the CANN version
check logic.
TODO: we notice that UT runs failed with CANN 8.3 image. So the base
image for UT is still 8.2. We'll fix it later.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
The current test cases lack end-to-end (e2e) testing for the
deepseek-v2-lite network in ge graph mode.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: CodeNine-CJ <chenjian343@huawei.com>
### What this PR does / why we need it?
Because the previous commit hash was accidentally deleted or
overwritten. This patch correct the commit hash available for
https://github.com/AscendTransport/Mooncake to make nightly ci happy
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
As a validation for #3664, add end-to-end tests to monitor the InternVL
model and ensure its continuous proper operation. This PR is only for
single-card. So the models that have more parameters than 8B like 78B
are needed to test using multi-cards.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
`pytest -sv tests/e2e/singlecard/multi-modal/test_internvl.py`
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: gcanlin <canlinguosdu@gmail.com>
### What this PR does / why we need it?
add new test model for aclgraph single_request
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
ut
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: lilinsiman <lilinsiman@gmail.com>
### What this PR does / why we need it?
add new e2e tests case for aclgraph memory
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
ut
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
Signed-off-by: lilinsiman <lilinsiman@gmail.com>
### What this PR does / why we need it?
This patch mainly fix the the problem of not being able to determine the
exit status of the pod's entrypoint script and some other tiny
optimizations:
1. Shorten wait for server timeout
2. fix typo
3. fix the issue of ais_bench failing to correctly access the proxy URL
in a PD separation scenario.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
This PR adds MALPO for deepseek aclgraph, we need to test it nightly
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
1. Refactor the file `mtp_proposer.py`, splits torchair related codes
into `mtp_torchair_proposer.py`
2. According to https://github.com/vllm-project/vllm/pull/24539,
implements padded speculative decoding as described in
https://github.com/vllm-project/vllm/issues/21984.
### Does this PR introduce _any_ user-facing change?
User can use `disable_padded_drafter_batch` to disable/enable padded
speculation, default is `False`.
offline example:
```
speculative_config={"method": "deepseek_mtp", "num_speculative_tokens": 1, "disable_padded_drafter_batch": False}
```
### How was this patch tested?
- [x] egaer with pad/unpad:
- [x] aclgraph with pad/unpad
- [x] torchair with pad/unpad
performance test of deepseek-r1 with tp16、dp1
aclgraph with pad ITL: 168ms
aclgraph with unpad ITL: 169ms
original: 178ms
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: xuyexiong <xuyexiong@huawei.com>
### What this PR does / why we need it?
Fix oom of deepseek-eplb nigtly test
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
Fix eplb nightly tests.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: offline0806 <3337230449@qq.com>
Co-authored-by: offline0806 <3337230449@qq.com>
### What this PR does / why we need it?
This patch optimize nightly CI:
1. Bug fixes ais_bench get None repo_type error
2. Fix A2 install kubectl error with arm arch
3. Fix the multi_node CI unable to determine whether the job was
successful error
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
Part of https://github.com/vllm-project/vllm-ascend/pull/3106
Fix Hybrid kvcache sharing bug in same attention type
Change the `shared_by` logic so that the same attention spec could share
the same buffer instead of allocating more hbm.
After this pr, kvcache memory saved 50% in qwen3-next compared with
before (`self_attn:linear_attn=1:3` in an `attn_group`), and
`gpu_memory_utilization` could increase to `0.8` on Qwen3-Next when
running on A2 64G/card with tp4
<img width="2833" height="1540" alt="image"
src="https://github.com/user-attachments/assets/2a91fa99-fb0f-447c-9e8b-acd587890fbe"
/>
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
Test pass with the latest e2e test case on qwen3-next
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: MengqingCao <cmq0113@163.com>
### What this PR does / why we need it?
This PR adds 2 more A2 caces which we need to test daily. It also
enhances the logging for aisbench test failures to improve issues
identification
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test
- vLLM version: v0.11.0rc3
- vLLM main:
https://github.com/vllm-project/vllm/commit/releases/v0.11.1
---------
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
This patch add multi-node test case for a2
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
This PR adds the 2P1D multi node func/acc/perf test cases, we need test
them daily
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
by running the test
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
Signed-off-by: wangli <wangli858794774@gmail.com>
Co-authored-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
This PR adds a qwq case for nightly test for qwen-qwq on A3 ,we need
test them daily
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
by running the test
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: ckhw <cuikai1@huawei.com>
### What this PR does / why we need it?
This PR adds a prefix cache case for nightly test for
DeepSeek-r1-0528-W8A8 on A3, we need test them daily.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
---------
Signed-off-by: root <root@hostname-2pbfv.foreman.pxe>
Co-authored-by: root <root@hostname-2pbfv.foreman.pxe>
### What this PR does / why we need it?
1. Rename common_fused_moe.py to fused_moe.py.
2. Rename fused_moe_prepare_and_finalize.py / FusedMoEPrepareAndFinalize
to prepare_finalize.py / PrepareAndFinalize.
3. Rename vllm_ascend/ops/moe to vllm_ascend/ops/fused_moe.
4. Move vllm_ascend/ops/fused_moe.py to
vllm_ascend/ops/fused_moe/fused_moe.py
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
e2e & ut
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
Signed-off-by: Pr0Wh1teGivee <calvin_zhu0210@outlook.com>
This PR comments out newly added vlm e2e test of ascend scheduler
scenario because I found that when running in multi-batch this will
stuck. Need to add this back after dealing with this issue.
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
Signed-off-by: whx-sjtu <2952154980@qq.com>
This PR fix the bug related with running multi-modal models with
AscendScheduler. This bug was introduced by PR #2372 by using the same
parameter names as vLLM with different default values.
Currently I fix this bug by changing the default values of these two
parameters to align with vLLM.
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
Signed-off-by: hw_whx <wanghexiang7@huawei.com>
Co-authored-by: hw_whx <wanghexiang7@huawei.com>
### What this PR does / why we need it?
This pull request mainly do the following things:
1. Add a doc for multi-node CI, The main content is the mechanism
principle and how to contribute
2. Simplify the config yaml for more developer-friendly
3. Optimized the mooncake installation script to prevent accidental
failures during installation
4. Fix the workflow to ensure the kubernetes can be apply correctly
5. Add Qwen3-235B-W8A8 disaggregated_prefill test
6. Add GLM-4.5 multi dp test
7. Add 2p1d 4nodes disaggregated_prefill test
8. Refactor nightly tests
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
### What this PR does / why we need it?
This PR adds the initial prefix cache case for nightly test for
Qwen3-32b-int8 on A3, we need test them daily.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
This PR moves the communication operation of shared experts out of extra
stream because I found that this might cause rtMemcpy related errors
when running shared experts multistream with aclgraph.
Furthermore, I utilize a global variable as extra stream object to avoid
allocating streams for each layer in full-graph mode.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: whx-sjtu <2952154980@qq.com>
### What this PR does / why we need it?
This PR add a new Qwen3-32b-int8 test case for nightly test. This test
case mainly test the performance and accuracy of Qwen3-32b-int8 with a
new feature.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
By running the test.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: root <root@hostname-2pbfv.foreman.pxe>
Co-authored-by: root <root@hostname-2pbfv.foreman.pxe>
### What this PR does / why we need it?
This PR adds the initial multi modal model for nightly test, including 3
cases for Qwen2.5-vl-7b acc/perf test on A3, we need test them daily. It
also inclues 8 cases for deepseek-r1-0528-w8a8 func, acc and perf tests
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
by running the test
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: jiangyunfan1 <jiangyunfan1@h-partners.com>
### What this PR does / why we need it?
Corrects the attribute access for retrieving the device from `q_a_proj`
to `q_proj`. This prevents an `AttributeError` as `q_a_proj` does not
exist on the class instance.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
Need MLAPO tests.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
This PR adds a jinja template for the k8s configuration file, prepare
for the upcoming 4-node CI
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
