### What this PR does / why we need it?
We support to use full graph with eagle.
Change list:
1. Distinguish between processing graph_params and draft_graph_params in
attention_v1.
2. Adapt the full-graph mode in eagle_proposer, include:
1). If use full graph, make Fullgraph Wrapper when load model.
2). Build a new meatadata, set running mode in FULL and mark attention
update in dummy_run when in Fullgraph mode.
3). Fixed and fill any attn_metadata, such as
attn_metadata.slot_mapping.
4). Add a descriptor.
5). Set running mode and triggered update metadata.
3. Trans is_mtp_model to is_draft_model, and add the update of
workspace.
NOTE:
When set async_scheduling=True, the draft model will enforce execution
in eager mode.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
Co-authored-by: Yizhou Liu <liu_yizhou@outlook.com>
Co-authored-by: Yizhou <136800916+yiz-liu@users.noreply.github.com>
RFC: https://github.com/vllm-project/vllm-ascend/issues/4629
Reason:
The metadata data class contains an excessive number of variables. We
will inherit the metadata of the community and simultaneously remove
some variables that are no longer needed at present.
Todo:
1. remove attn_state partly.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: weijinqian_v1 <weijinqian@huawei.com>
Co-authored-by: weijinqian_v1 <weijinqian@huawei.com>
### What this PR does / why we need it?
This PR fixes some incorrect `get_current_vllm_config` calling, which
creates empty vllm_config instead.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
1. In addition to
[#4168](https://github.com/vllm-project/vllm-ascend/pull/4168),
[#5011](https://github.com/vllm-project/vllm-ascend/pull/5011)， this PR
adds two more pattern for AddRmsnormQuant with SP enabled. The key
difference is to insert an additional `maybe_all_gather_and_maybe_unpad`
between `addrmsnorm` and `quantize`.
2. This PR also introduce another api `torch.ops.vllm.quantize`, so that
we pass `input_scale` and `input_scale_reciprocal` at the same time.
This is because `npu_add_rms_norm_quant` and `npu_quantize` requires
different `div_mode`. To avoid introducing additional reciprocal
calculation in runtime, we have to pass both of them to quantize api.
3. Removes redundant `AscendQuantRmsnorm`.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
We will expose the enabling switch for npugraph_ex to better facilitate
subsequent optimization.
### Does this PR introduce _any_ user-facing change?
Previously, the enable_npugraph_ex switch would trigger an error; now we
have removed the error reporting mechanism to better facilitate
subsequent optimization efforts.
Basic functionalities are available in CANN and torch_npu for Q3, while
advanced optimizations will depend on the Q4 release.
### How was this patch tested?
llm =LLM(
model=model,
enforce_eager=False ,
additional_config={
"enable_npugraph_ex": True
},
compilation_config={
"cudagraph_mode": "FULL_DECODE_ONLY",
"cudagraph_capture_sizes": [16],
},
}
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: p00465316 <panchao13@huawei.com>
Co-authored-by: p00465316 <panchao13@huawei.com>
Co-authored-by: weijinqian0 <1184188277@qq.com>
### What this PR does / why we need it?
This PR add `qkv_rmsnorm_rope` operator and introduces a graph fusion
pass for `qknorm_rope` operations. The implementation includes a new
configuration flag, a pattern matching pass using
`torch._inductor.pattern_matcher`, and a custom Triton kernel for the
fused operation.
Co-authored-by: Angazenn
[supperccell@163.com](mailto:supperccell@163.com)
### Does this PR introduce _any_ user-facing change?
Yes, add new additional_config
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: wxsIcey <1790571317@qq.com>
### What this PR does / why we need it?
This PR adds back pa in scenarios of small batch sizes due to
performance consideration. Will remove pa once fia performs better than
pa in all scenarios.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
CI passed with existing test.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: whx-sjtu <2952154980@qq.com>
Co-authored-by: weijinqian0 <1184188277@qq.com>
### What this PR does / why we need it?
AddRMSNorm(with bias) and Quant Fusion Pattern
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
CI passed with new added/existing test.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: wxsIcey <1790571317@qq.com>
### What this PR does / why we need it?
This PR standardizes the fusion naming, changing
`enable_quantization_fusion` to `fuse_norm_quant`, and enables e2e
testing.
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
CI passed with new added/existing test.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: wxsIcey <1790571317@qq.com>
### What this PR does / why we need it?
We introduced the npugraph_ex backend through the vllm's adaptor
dispatch mechanism to accelerate aclgraph. This solution is based on
torch.compile and uses torchair to optimize the fx.graph. The
performance gains are mainly obtained from the static kernel. We
conducted tests on Qwen3-30B and achieved over 5% performance
optimization.
### Does this PR introduce _any_ user-facing change?
Yes, we add a new switch named"enable_npugraph_ex" in additional_config,
default is False.
We also add an example to show how to register custom replacement pass
### More information about this PR
This feature depends on the release of CANN and torch_npu in Q4.
We tested it on a package that has not been publicly released yet and
verified that the functionality works.
This feature is still experimental at the moment; setting the config
true will directly raise error.
Merging into the main branch initially involves some preliminary commits
to facilitate subsequent development and testing of the feature, as well
as to avoid submitting an excessively large PR at once.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: chencangtao <chencangtao@huawei.com>
Signed-off-by: ChenCangtao <50493711+ChenCangtao@users.noreply.github.com>
Co-authored-by: chencangtao <chencangtao@huawei.com>
Co-authored-by: panchao-hub <315134829@qq.com>
Co-authored-by: wbigat <wbigat@163.com>
Co-authored-by: Mengqing Cao <cmq0113@163.com>
### What this PR does / why we need it?
The first commit support `FULL_DECODE_ONLY`:
- Update `AscendSFAMetadataBuilder` to use `num_input_tokens` for
slicing slots and positions, ensuring fixed tensor shapes.
- Implement padding logic for `query_start_loc` in `NPUModelRunner` to
support uniform decode in full graph mode, aligning with GPU runner
behavior.
- Adjust MLA cosine cache allocation to occur independently of graph
mode and switch to using device-resident sequence lengths for attention
metadata.
- Remove redundant slicing of hidden states and outputs in
`AscendSFAImpl` and optimize `sin`/`cos` cache updates.
The second commit take MTP into account:
- Update `AscendSFAMetadataBuilder` to use `num_input_tokens` for
slicing slots and positions, ensuring fixed tensor shapes.
- Implement padding logic for `query_start_loc` in `NPUModelRunner` to
support uniform decode in full graph mode, aligning with GPU runner
behavior.
- Adjust MLA cosine cache allocation to occur independently of graph
mode and switch to using device-resident sequence lengths for attention
metadata.
- Remove redundant slicing of hidden states and outputs in
`AscendSFAImpl` and optimize `sin`/`cos` cache updates.
And the rest of them are just bugfix.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
Test cases needed.
- vLLM version: v0.12.0
- vLLM main:
ad32e3e19c
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
The main goal of this PR to alleviate the high maintenance burden from
model duplication when we are going to do the model optimization. Some
of our optimized models diverges a little from the vllm's modeling, but
needs to rewrite several part of original one, brings negligible
maintenance bruden to the vllm-ascend.In order to solve that, we propose
to leverage `torch.compile` and `inductor pattern matcher`,
automatically fuse the pattern we want to merge. For more details can
refer to the RFC https://github.com/vllm-project/vllm-ascend/issues/4239
This pr integrates `AddRMSNorm` and the `Quant` operator, which can
improve the inference speed of models using `w8a8 `quantization.
### Does this PR introduce _any_ user-facing change?
Yes, add new additional_config
### How was this patch tested?
```python
def main():
prompts = [
"The president of the United States is Mr.",
]
# Create a sampling params object.
sampling_params = SamplingParams(max_tokens=100, temperature=0.6, top_k=40, top_p=0.95)
# Create an LLM.
llm = LLM(
model="/root/.cache/modelscope/hub/models/vllm-ascend/Qwen3-8B-W8A8",
# enforce_eager=True,
tensor_parallel_size=1,
trust_remote_code=True,
gpu_memory_utilization=0.7,
quantization="ascend",
)
# Generate texts from the prompts.
outputs = llm.generate(prompts, sampling_params)
for output in outputs:
prompt = output.prompt
generated_text = output.outputs[0].text
print(f"Prompt: {prompt!r}, Generated text: {generated_text!r}")
```
```text
Prompt: 'The president of the United States is Mr.', Generated text: ' Trump. The president of the United States is Mr. Biden. Which of the following statements is correct? \n\nA. Mr. Trump is Mr. Biden. \nB. Mr. Trump is not Mr. Biden. \nC. The president of the United States is not Mr. Trump. \nD. The president of the United States is not Mr. Biden.\n\nThe question presents a contradiction: it states that "The president of the United States is Mr. Trump" and "The president of'
```
- vLLM version: 86e178f7c4d8c3b0eaf3c8e3f810a83f63b90e24
- vLLM main:
86e178f7c4
---------
Signed-off-by: Icey <1790571317@qq.com>
Signed-off-by: wxsIcey <1790571317@qq.com>
### What this PR does / why we need it?
Currently, the MTP model still runs in eager in full graph mode. This PR
adapts the MTP with the full graph capture and execution. When the graph
mode is set to "FULL_DECODE_ONLY", the MTP will run in full-graph to
improve the performance.
The change in both disable_padded_drafter_batch is True and False case
include:
1. Add _mtp_graph_params in acl_graph.py to isolate the data of main
model and the data of MTP.
2. Padding some metadata in mla_v1.py when in fullgraph mode.
3. Fixed the essential data address that will be used in model.forward.
4. Adapted according to the aclgraph capture framwork:
1). Rebuild MTP model with ACLGraphWrapper.
2). Add common attn metadata when start capture in MTP dummy_run.
3). Add common attn metadata update in MTP.
4). Addapted data update when num_speculative_tokens > 1.
5. Add a patch of MTP to adapt vllm v0.11.0.
Existing Issues:
1. When disable_padded_drafter_batch=True and running in FullGraph mode,
the data of the first-round requests in MTP is abnormal. We need to
identify the cause subsequently.
2. When disable_padded_drafter_batch=False and running in FullGraph
mode, the acceptance rate of the second and third tokens will decrease
(For example, if we set the num_speculative_tokens=3, the acceptance
rate of first token is 90%, the second is only 50% lower than 60%, the
third is only 20% lower than 30%). The reason is that the data processed
after the model runs does not match. This is a problem from another PR.
It works fine in eager and PIECEWISE mode, but has problem in FullGraph
mode. Once we have a solution, we will submit a bugfix.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
### What this PR does / why we need it?
The current library only supports the FullDecodeOnly graph mode, which
enables full graph execution during the decode. This PR extends support
to allow full graph execution in both the prefill and decode, referred
to as FULL graph mode.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
### What this PR does / why we need it?
In the DCP-PCP graph mode scenario, there is a shape issue with multiple
batches. This PR fixes this problem.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
This PR fixes a bug where the workspace of `_npu_paged_attention` in
setup is smaller than execution. For current implementation of
FULL_DECODE_ONLY with `_npu_paged_attention`, we use
`_npu_paged_attention_get_workspace` when capturing with `max_model_len`
as `seq_lens`. This assumes that PA with larger `seq_lens` inputs should
have larger workspace than smaller `seq_lens`. However, there are rare
cases where PA with smaller `seq_lens` incurs larger space. So I add
`get_workspace` directly into `update_attn_params`.
This change might introduce small(≈1%) performance degradation for low
num_tokens(such as 1) in decode phase, and there is no other known
memory issues. So I think this change is acceptable. We can remove this
if new attention op (such as `npu_fused_infer_attention_score`) does not
have such problems.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
1、in attention_v1 module, convert bsnd t0 tnd when pcp and dcp
2、fix tochair bug: service startup problem
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
1、revert TND modify when dcp pcp, which is introduced by
f57bdb09fc
2、deal aclgraph pad border issue
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
In the `update_*attn_params` functions, the
`torch.npu.stream(update_stream)` context manager was previously located
inside the for-loop that updates parameters for each layer. This
resulted in redundant stream initiations for every layer, adding
unnecessary overhead.
This commit refactors the code by moving the stream context manager to
wrap the entire for-loop. This ensures that the update stream is
initiated only once per function call, rather than for each layer. This
change reduces 90us in each decode model.
update stream in every layer:
<img width="1720" height="383" alt="image"
src="https://github.com/user-attachments/assets/70e4cb69-5bc1-4180-a67d-c99132134be6"
/>
remove update stream in every layer:
<img width="1269" height="175" alt="image"
src="https://github.com/user-attachments/assets/0e290edb-b0ce-48fe-b032-1b924ade6ae5"
/>
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
### What this PR does / why we need it?
Upgrade torch-npu to the official release version 2.7.1
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
dcp pcp support full aclgraph, including mla attention_v1
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
The cache for MLA decode graph parameters was holding strong references
to tensors, preventing them from being garbage collected and leading to
increased memory usage.
This change wraps the cached tensors in weak references, allowing them
to be deallocated when no longer in use and reducing overall memory
pressure.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
None.
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
Make the Full Graph mode can run with MTP.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
### What this PR does / why we need it?
1.qwen3 moe uses add_rms_norm_quant op instead of 'add_rms_norm op and
quant op' during quantization scene.
2.torch_npu.add_rms_norm_quant op fixed accuracy while model weights is
quantized by anti_method m4, m4 quantization is asymmetric outlier
suppression method, it will generate none-zero norm bias,
add_rms_norm_quant op updated to add this parameter to calculate.
3. add torch-npu check
### Does this PR introduce _any_ user-facing change?
new feature works if torch_npu version >= torch_npu-2.7.1.dev20250919
### How was this patch tested?
1.no special parameters to set, no new envs to set. new feature works if
torch_npu version >= torch_npu-2.7.1.dev20250919
2.use qwen3 moe quantization model to test ,such as
Qwen3-235B-A22B-W8A8, Qwen3-30B-A3B-W8A8,
Qwen3-235B-A22B-Instruct-2507-m4 (anti_method m4)
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: h30027576 <huangdong51@huawei.com>
### What this PR does / why we need it?
Calculate in advance the workspace memory size needed for the
PagedAttention operator to avoid deadlocks during resource cleanup. This
PR requires torch_npu version 0920 or newer.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
### What this PR does / why we need it?
Adds support for capturing the Multi-Layer Attention (MLA) decode
operation into an ACL graph. This improves performance by compiling the
attention kernel for single-token decoding.
Key changes include:
- Implementing the graph capture logic for the MLA kernel, including
workspace management and parameter updates.
- Modifying the rotary embedding (RoPE) handling to use pre-allocated
tensors, which is a requirement for graph capture.
- Adding a `build_for_graph_capture` method to the MLA metadata builder
to create dummy metadata during the graph compilation phase.
Known issues:
- Currently, MTP is not supported in FULL_DECEDE_ONLY mode -- we're
working on a fix
- We are preparing to remove update_mla_attn_params with
auto_dispatch_capture
### Does this PR introduce _any_ user-facing change?
compilation_config={
"cudagraph_mode": "FULL_DECODE_ONLY",
},
### How was this patch tested?
- vLLM version: v0.11.0
---------
Signed-off-by: panchao-hub <315134829@qq.com>
Signed-off-by: p00465316 <panchao13@huawei.com>
Co-authored-by: p00465316 <panchao13@huawei.com>
Co-authored-by: Yizhou Liu <liu_yizhou@outlook.com>
we notice that torch npu 0919 doesn't work. This PR revert related
change which rely on 0919 version.
Revert PR: #3295#3205#3102
Related: #3353
- vLLM version: v0.11.0
### What this PR does / why we need it?
Calculate in advance the workspace memory size needed for the
PagedAttention operator to avoid deadlocks during resource cleanup. This
PR requires torch_npu version 0920 or newer.
### How was this patch tested?
- vLLM version: v0.11.0
---------
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
### What this PR does / why we need it?
This is the follow-up PR of #2128 .
Moves graph parameter management components, including `GraphParams`,
`get_graph_params`, and `set_graph_params`, from the generic `utils.py`
to the more specific `compilation/acl_graph.py`.
Additionally, extracts the `update_attn_params` logic from the
`NPUModelRunner` class into a standalone function within the `acl_graph`
module.
This refactoring improves code organization by centralizing ACL
graph-related logic into its own dedicated module, enhancing modularity
and clarity.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
None needed.
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
Note: This depends on [vLLM
#25161](https://github.com/vllm-project/vllm/pull/25161) and the
torch\_npu release from September 30.
### What this PR does / why we need it?
This pull request adds `FULL_DECODE_ONLY` mode for GQA/MHA models (MLA
models like DeepSeek V3/R1 are not included). Key improvements include:
* **Reduced dispatch latency:** By replaying the entire model execution
graph at once, we cut overhead compared with multiple smaller replays.
* **Stabilized multi-device performance:** Captureing the whole model as
one static graph also mitigates the dispatch fluctuations across
devices.
* **Stream/resource savings:** Consolidating graph captures frees up
streams, allowing more graphs to be captured.
**Known issues:**
1. `_npu_paged_attention` currently manages its own workspace in
`torch_npu`, which can deadlock when synchronizing during graph replay —
we’re working on a fix.
There may be other corner cases. This PR is the first in a planned
series; we’ll continue to iterate and address remaining issues in
follow-ups.
This is essentially a port of #1503 and #1677, but includes two major
changes:
1. Let `graph_dispatcher` decide the graph mode instead of hard-coding
it in the backend, which decouples Full Graph and Piecewise Graph and
could make it possible to remove dynamo.
2. Adapt to the new `attn_group` logic, but leave a small hack in
`update_graph_params`; multi-attention models may or may not be fully
supported yet.
### Does this PR introduce _any_ user-facing change?
```python
compilation_config={
"cudagraph_mode": "FULL_DECODE_ONLY",
},
```
### How was this patch tested?
Tests included.
- vLLM version: v0.10.2
- vLLM main:
9607d5eb44
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
**Background:**
There are two principles about operator registration in PyTorch
- The same namespace can be only registered once by `TORCH_LIBRARY`
- The operator signatures can be only registered once by `def`
Considering that all custom operators defined in the current repo are
only used by Ascend, instead of defining a common operator schema by
vLLM, all accelerators then follow this operator schema and complete the
implementation based on their respective hardware, which is conducive to
functional abstraction.
Therefore, we can rename the operator registration namespace to an
Ascend-specific namespace(**_C_ascend**).
Related ISSUE: https://github.com/vllm-project/vllm-ascend/issues/2742
- vLLM version: main
- vLLM main:
f592b3174b
Signed-off-by: FFFrog <ljw1101.vip@gmail.com>
### What this PR does / why we need it?
As vllm will set `cudagraph_mode` to `NONE` before
`check_and_update_config` in post init of `VllmConfig`
(5da4f5d857/vllm/config/__init__.py (L3630)),
we always have `cudagraph_mode` isn't `None`, thus we must remove this
check and add it when the related adaption in vllm is done.
part of https://github.com/vllm-project/vllm-ascend/pull/2577, will add
the e2e test on applying reply after the CI refactor is done
### How was this patch tested?
CI passed with existing test.
- vLLM version: v0.10.1.1
- vLLM main:
f48a9af892
Signed-off-by: MengqingCao <cmq0113@163.com>
### What this PR does / why we need it?
Fix some ci issue and refactor modelrunner
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
CI passed with existing test.
- vLLM version: v0.10.0
- vLLM main:
4d9c61993a
---------
Signed-off-by: wangli <wangli858794774@gmail.com>
Signed-off-by: MengqingCao <cmq0113@163.com>
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
Co-authored-by: wangli <wangli858794774@gmail.com>
Co-authored-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
Remove redundant imported `envs`, using `envs_ascend` instead.
```python
import vllm.envs as envs_vllm
import vllm_ascend.envs as envs_ascend
```
- vLLM version: v0.10.0
- vLLM main:
71683ca6f6
---------
Signed-off-by: shen-shanshan <467638484@qq.com>
1. upgrade vllm to 0.9.1. 0.9.0 is not supported for main branch now.
keep doc to 0.9.0 until we release the first 0.9.1 release.
2. disable V0 test for PR
3. move actionlint check to lint job
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
1. Add `__init__.py` for vllm_ascend/compilation to make sure it's a
python module
2. Fix model runner bug to keep the same with vllm
3. Add release note for 0.9.0rc2
---------
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
1. Implentment `NPUPiecewiseBackend` to enable aclgraph
2. Eable aclgraph by default in V1, but raise error when running
deepseek and raise warning when running models except for qwen
### How was this patch tested?
CI pass with the new ut
---------
Signed-off-by: MengqingCao <cmq0113@163.com>
