Fix model run _npu_flash_attention in _forward_prefill_no_cache hang
issue, it was caused by wrong attention mask dtype.
### How was this patch tested?
Yes, tesed on Qwen2.5-VL and Qwen2.5-Omni
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: Ting FU <futing10@huawei.com>
### What this PR does / why we need it?
Currently, there are two paths to judge the chip type in code,
`get_ascend_soc_version` use `get_soc_version` api in torch_npu, and
`is_310p` `use _build_info.__soc_version__`, which generate when
install. We need to unify the two paths.
We need to unify these codes based on the following points:
1. We need to ensure consistency in chip type judgment between compiling
and running states;
2. In compiling state, we need chip type to complete op's compilation,
but in running state, we only need device
type(910B/910_93/310P/910_95/etc) to make code branch judgement;
3. In compiling state, torch_npu may not have been installed yet, so we
can't use torch_npu's api.
Based on the above points, we have made the following changes:
1. When user set env `SOC_VERSION`, use it; when not set, query
soc_version by `npu-smi`;
2. generate device_type based on soc_version when compiling, and write
`__device_type__` instead of `__soc_version__` in `_build_info.py`;
3. In running state, use `__device_type__` to judge code branch.
### Does this PR introduce _any_ user-facing change?
When not set env `SOC_VERSION`, it will not be `ASCEND910B1` by default,
we will query soc_version by `npu-smi`. And env `SOC_VERSION` must be in
the list `soc_to_device` in `setup.py`.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: zzzzwwjj <1183291235@qq.com>
There is a lot hack code for v0.11.0, which makes the code hard to
upgrade to newer vLLM version. Since v0.11.0 will release soon. Let's
drop v0.11.0 support first. Then we'll upgrade to v0.11.2 soon.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
Currently, the MTP model still runs in eager in full graph mode. This PR
adapts the MTP with the full graph capture and execution. When the graph
mode is set to "FULL_DECODE_ONLY", the MTP will run in full-graph to
improve the performance.
The change in both disable_padded_drafter_batch is True and False case
include:
1. Add _mtp_graph_params in acl_graph.py to isolate the data of main
model and the data of MTP.
2. Padding some metadata in mla_v1.py when in fullgraph mode.
3. Fixed the essential data address that will be used in model.forward.
4. Adapted according to the aclgraph capture framwork:
1). Rebuild MTP model with ACLGraphWrapper.
2). Add common attn metadata when start capture in MTP dummy_run.
3). Add common attn metadata update in MTP.
4). Addapted data update when num_speculative_tokens > 1.
5. Add a patch of MTP to adapt vllm v0.11.0.
Existing Issues:
1. When disable_padded_drafter_batch=True and running in FullGraph mode,
the data of the first-round requests in MTP is abnormal. We need to
identify the cause subsequently.
2. When disable_padded_drafter_batch=False and running in FullGraph
mode, the acceptance rate of the second and third tokens will decrease
(For example, if we set the num_speculative_tokens=3, the acceptance
rate of first token is 90%, the second is only 50% lower than 60%, the
third is only 20% lower than 30%). The reason is that the data processed
after the model runs does not match. This is a problem from another PR.
It works fine in eager and PIECEWISE mode, but has problem in FullGraph
mode. Once we have a solution, we will submit a bugfix.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
remove get_metadata_cls. It's only used for V0 engine and has been removed from vLLM already.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
Fix pcp + mtp bug while using acl graph.
While using pcp + mtp, we need to flatten block_table to avoid irregular
attn mask shape, this was done in mla attn_metadata builder, but we
found out that this influences block_table address and leads to
incorrect results while enable acl graph.
To fix this, we enlarge block_table buffer size and flatten block_table
in model_runner prepare_inputs, so this will not influence block_table
address.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: zhangsicheng5 <zhangsicheng5@huawei.com>
### What this PR does / why we need it?
The current library only supports the FullDecodeOnly graph mode, which
enables full graph execution during the decode. This PR extends support
to allow full graph execution in both the prefill and decode, referred
to as FULL graph mode.
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
Signed-off-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
Co-authored-by: wangxiaoxin-sherie <wangxiaoxin7@huawei.com>
### What this PR does / why we need it?
1、qwen GQA attention_v1 optim
2、DeepSeek MLA refactor, all gather q -> all gather kv
3、modelrunner refactor for chunk prefill, we remove some code not use
- vLLM version: v0.11.0
- vLLM main:
2918c1b49c
---------
Signed-off-by: LookAround <lixushi@huawei.com>
Signed-off-by: Delphine-Nic <tanwenqin@huawei.com>
Co-authored-by: Delphine-Nic <tanwenqin@huawei.com>
### What this PR does / why we need it?
ChunkPrefill now can support Long Sequence Feature Pcp&Dcp
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
CI tests passed with self-test
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: Apocalypse990923-qshi <qiushixu@usc.edu>
Signed-off-by: Delphine-Nic <tanwenqin@huawei.com>
Co-authored-by: Delphine-Nic <tanwenqin@huawei.com>
Co-authored-by: Delphine-Nic <3834144971@qq.com>
### What this PR does / why we need it?
In the DCP-PCP graph mode scenario, there is a shape issue with multiple
batches. This PR fixes this problem.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
The code bug caused an empty bubble. When the npu_paged_cache_load
operator was called, it forcibly transferred seq_len2 to the device,
which triggered synchronization and interrupted the CPU operator's
launch stream.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: underfituu <hzhucong@163.com>
### What this PR does / why we need it?
Adapts mtp function to Qwen3-next.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: drslark <slarksblood@qq.com>
### What this PR does / why we need it?
1、in mla_v1 module, add torch_npu.npu_attention_update op when pcp and dcp
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: LookAround <lixushi@huawei.com>
### What this PR does / why we need it?
Fixes a compatible bug with `torch_npu.npu_fused_infer_attention_score`
which is discribed in
https://github.com/vllm-project/vllm-ascend/issues/4020.
@momo609 tells us this solution.
### Does this PR introduce _any_ user-facing change?
N/A
### How was this patch tested?
The environment is same with this issue,
https://github.com/vllm-project/vllm-ascend/issues/4020.
We modify the code according to
https://github.com/vllm-project/vllm-ascend/pull/3918.
And run below codes:
```python
# run with Qwen3-next-mtp
prompts = [
"Who are you?",
]
sampling_params = SamplingParams(temperature=0.0, top_p=0.95, top_k=40, max_tokens=128)
llm = LLM(model="/home/model/Qwen3-Next-80B-A3B-Instruct",
tensor_parallel_size=4,
enforce_eager=True,
distributed_executor_backend="mp",
gpu_memory_utilization=0.7,
speculative_config={
"method": "qwen3_next_mtp",
"num_speculative_tokens": 1,
},
max_model_len=4096)
outputs = llm.generate(prompts, sampling_params)
for output in outputs:
prompt = output.prompt
generated_text = output.outputs[0].text
print(f"Prompt: {prompt!r}, Generated text: {generated_text!r}")
```
Outputs:
```text
Prompt: 'Who are you?', Generated text: ' I am Qwen, a large-scale language model independently developed by the Tongyi Lab under Alibaba Group. I am designed to answer questions, create text such as stories, official documents, emails, scripts, and more, as well as perform logical reasoning, programming, and other tasks. If you have any questions or need assistance, feel free to let me know anytime!'
```
Now, `torch_npu.npu_fused_infer_attention_score` is compatible with
Qwen3-Next.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: drslark <slarksblood@qq.com>
### What this PR does / why we need it?
1、in attention_v1 module, convert bsnd t0 tnd when pcp and dcp
2、fix tochair bug: service startup problem
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
1、revert TND modify when dcp pcp, which is introduced by
f57bdb09fc
2、deal aclgraph pad border issue
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
This PR upgrade CANN from 8.2rc1 to 8.3rc1 and remove the CANN version
check logic.
TODO: we notice that UT runs failed with CANN 8.3 image. So the base
image for UT is still 8.2. We'll fix it later.
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
### What this PR does / why we need it?
- Add support for DeepSeek v3.2 in FULL_DECODE_ONLY mode.
- Add unit test for sfa_v1.
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: 1Fire4 <wangdingyi2@huawei.com>
### What this PR does / why we need it?
Upgrade torch-npu to the official release version 2.7.1
- vLLM version: v0.11.0
- vLLM main:
83f478bb19
---------
Signed-off-by: wangxiyuan <wangxiyuan1007@gmail.com>
This is the follow-up PR to PR #3189, which continues to refactor sfa
into mla and finally remove deepseek_v3_2.py. This is the last PR of
deepseek modeling refactoring. After this, all deepseek-related model
codes are removed from vllm_ascend.
FurtherMore, after this PR deepseek v3.2 can run chunk-prefill with
correct accuracy.
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
---------
Signed-off-by: whx-sjtu <2952154980@qq.com>
This PR fixes a mlapo accuracy problem related with weight processing.
Furthermore, add back mlapo related e2e test with quantized deepseek
model.
- vLLM version: v0.11.0rc3
- vLLM main:
83f478bb19
Signed-off-by: whx-sjtu <2952154980@qq.com>
### What this PR does / why we need it?
We have optimized the performance of long sequences：First,Modify the
input data format for attention calculation. Instead of using the
original BSND format, remove the logic for converting between TND and
BSND, and directly adopt the TND format.
The TND input format can be directly reused, which shortens the data
flow path. Converting to BSND is an unnecessary processing step.Second,
we switched the output update of the concatenated small operators to the
npu_attention_update fusion operator to improve performance.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: pichangping <1337510399@qq.com>
### What this PR does / why we need it?
dcp pcp support full aclgraph, including mla attention_v1
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
Signed-off-by: weiguihua2 <weiguihua2@huawei.com>
### What this PR does / why we need it?
The cache for MLA decode graph parameters was holding strong references
to tensors, preventing them from being garbage collected and leading to
increased memory usage.
This change wraps the cached tensors in weak references, allowing them
to be deallocated when no longer in use and reducing overall memory
pressure.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
None.
- vLLM version: v0.11.0rc3
- vLLM main:
c9461e05a4
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
Remove codes of dbo.
Currently, vLLM has supported dbo with pr:
https://github.com/vllm-project/vllm/pull/23693.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
Signed-off-by: zzzzwwjj <1183291235@qq.com>
### What this PR does / why we need it?
This PR refactors the Ascend attention implementation to align with
vLLM's core interfaces, simplifying the code and improving
maintainability.
### Key Changes:
* **Align with vLLM's Attention Interface**: The `forward` method
signature in `AscendAttentionBackendImpl` now matches the base
`AttentionImpl` in vLLM, removing the custom `trace_flag`.
* **Enable Opaque Attention Operator**: By adding `opaque_attention_op`
to `AscendPlatform`, we allow vLLM to wrap our attention kernel in its
standard `vllm.unified_attention_with_output` operator. This avoids the
need for a custom call path.
* **Remove Obsolete Code**:
* The custom op `vllm.unified_ascend_attention_with_output` has been
deleted as it is now redundant.
* The `trace_flag` and its associated logic were removed, reducing code
complexity.
* An outdated quantization branch within the attention implementation
was cleaned up.
* **Improve Readability**: Renamed output variables (`output` vs.
`intermediate_output`) and added comments to clarify the in-place nature
of the attention output.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
No extra tests needed.
- vLLM version: v0.11.0rc3
- vLLM main:
17c540a993
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
Corrects the attribute access for retrieving the device from `q_a_proj`
to `q_proj`. This prevents an `AttributeError` as `q_a_proj` does not
exist on the class instance.
### Does this PR introduce _any_ user-facing change?
None.
### How was this patch tested?
Need MLAPO tests.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Yizhou Liu <liu_yizhou@outlook.com>
### What this PR does / why we need it?
This reverts commit
bf87606932.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
E2E vllm serving with `enable_shared_expert_dp: true` in eager mode as
before.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: linfeng-yuan <1102311262@qq.com>
### What this PR does / why we need it?
Previously, the mask construction process created multiple tensors of
size (max_model_len, max_model_len). When max_model_len reached 128k,
single GPU host memory usage exceeded hundreds of GB, causing process
OOM crashes. This update optimizes the mask generation to significantly
reduce memory consumption.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
CI pass.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Jade Zheng <zheng.shoujian@outlook.com>
### What this PR does / why we need it?
This pull request removes the redundant parameters `gamma1` and `beta1`
(also named `gamma0`/`beta0` in some places) from the `mla_preprocess`
kernel and its calling hierarchy. The changes are consistent across C++
kernel code, bindings, and Python call sites. The parameters were unused
in the lower-level functions, so their removal is a good cleanup.
### Does this PR introduce _any_ user-facing change?
The python interface of the kernel is affected, and the params of
`gamma0` and `beta0` are not needed.
### How was this patch tested?
The unit-test of the kernel is adapted accordingly.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: mojave2 <chenchen145@huawei.com>
### What this PR does / why we need it?
Add new accuracy test case Deepseek-V2-Lite-W8A8 for aclgraph
### Does this PR introduce _any_ user-facing change?
no
### How was this patch tested?
ut
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: lilinsiman <lilinsiman@gmail.com>
### What this PR does / why we need it?
v_proj combining transpose and matmul
### Does this PR introduce _any_ user-facing change?
No
### How was this patch tested?
CI passed with new added/existing test.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: GDzhu1 <809721801@qq.com>
This PR deletes model codes of deepseek_v2 and deepseek_v3 to reuse the
model file from vLLM.
vLLM Ascend now uses custom ops register way instead of model file
hard-coding.
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: whx-sjtu <2952154980@qq.com>
### What this PR does / why we need it?
Add new npu_fused_infer_attention_score op to improve perfomance in
flash attention case.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: ZYang6263 <zy626375@gmail.com>
### What this PR does / why we need it?
This PR aims to add padding logic to seq_lens、block_tables when running
in full decode scenario. Before this PR, the number of input tokens with
padding might exceeds corresponding seq_lens. For example, when running
in full decode scenario:
```
input_ids : [1, 3, 0, 0]
seq_lens: [2, 1]
query_start_loc: [0, 1, 2]
```
Here, `input_ids` is padded by 2 tokens while
`seq_lens`/`query_start_loc` are not. The mismatch between `input_ids`
and `seq_lens`/`query_start_loc` might cause some potential bugs. This
PR would change it into :
```
input_ids : [1, 3, 0, 0]
seq_lens: [2, 1, 1, 1]
query_start_loc: [0, 1, 2, 3, 4]
```
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
Make the Full Graph mode can run with MTP.
### Does this PR introduce _any_ user-facing change?
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
Signed-off-by: anon189Ty <Stari_Falcon@outlook.com>
### What this PR does / why we need it?
shared expert dp for deepseek and deepseek_mtp, could be combined with
sp to improve performance.
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: zhaozx-cn <zhaozx2116@163.com>
Co-authored-by: realliujiaxu <realliujiaxu@163.com>
### What this PR does / why we need it?
The current implementation of FIA will introduce an `to_list` operation
for actual_seq_lengths_q and seq_lens，which comsumes extra time. These
operation can be moved earlier into `build` operation of attention
metadata.
### Does this PR introduce _any_ user-facing change?
No.
### How was this patch tested?
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: Angazenn <supperccell@163.com>
### What this PR does / why we need it?
1.qwen3 moe uses add_rms_norm_quant op instead of 'add_rms_norm op and
quant op' during quantization scene.
2.torch_npu.add_rms_norm_quant op fixed accuracy while model weights is
quantized by anti_method m4, m4 quantization is asymmetric outlier
suppression method, it will generate none-zero norm bias,
add_rms_norm_quant op updated to add this parameter to calculate.
3. add torch-npu check
### Does this PR introduce _any_ user-facing change?
new feature works if torch_npu version >= torch_npu-2.7.1.dev20250919
### How was this patch tested?
1.no special parameters to set, no new envs to set. new feature works if
torch_npu version >= torch_npu-2.7.1.dev20250919
2.use qwen3 moe quantization model to test ,such as
Qwen3-235B-A22B-W8A8, Qwen3-30B-A3B-W8A8,
Qwen3-235B-A22B-Instruct-2507-m4 (anti_method m4)
- vLLM version: v0.11.0rc3
- vLLM main: https://github.com/vllm-project/vllm/commit/v0.11.0
---------
Signed-off-by: h30027576 <huangdong51@huawei.com>
