| `-e, --escape, --no-escape` | whether to process escapes sequences (\n, \r, \t, \', \", \\) (default: true) |
| `--rope-scaling {none,linear,yarn}` | RoPE frequency scaling method, defaults to linear unless specified by the model<br/>(env: LLAMA_ARG_ROPE_SCALING_TYPE) |
| `--rope-scale N` | RoPE context scaling factor, expands context by a factor of N<br/>(env: LLAMA_ARG_ROPE_SCALE) |
| `--rope-freq-base N` | RoPE base frequency, used by NTK-aware scaling (default: loaded from model)<br/>(env: LLAMA_ARG_ROPE_FREQ_BASE) |
| `--rope-freq-scale N` | RoPE frequency scaling factor, expands context by a factor of 1/N<br/>(env: LLAMA_ARG_ROPE_FREQ_SCALE) |
| `--yarn-orig-ctx N` | YaRN: original context size of model (default: 0 = model training context size)<br/>(env: LLAMA_ARG_YARN_ORIG_CTX) |
| `--mmap, --no-mmap` | whether to memory-map model (if disabled, slower load but may reduce pageouts if not using mlock) (default: enabled)<br/>(env: LLAMA_ARG_MMAP) |
| `--numa TYPE` | attempt optimizations that help on some NUMA systems<br/>- distribute: spread execution evenly over all nodes<br/>- isolate: only spawn threads on CPUs on the node that execution started on<br/>- numactl: use the CPU map provided by numactl<br/>if run without this previously, it is recommended to drop the system page cache before using this<br/>see https://github.com/ggml-org/llama.cpp/issues/1437<br/>(env: LLAMA_ARG_NUMA) |
| `-dev, --device <dev1,dev2,..>` | comma-separated list of devices to use for offloading (none = don't offload)<br/>use --list-devices to see a list of available devices<br/>(env: LLAMA_ARG_DEVICE) |
| `--list-devices` | print list of available devices and exit |
| `-sm, --split-mode {none,layer,row}` | how to split the model across multiple GPUs, one of:<br/>- none: use one GPU only<br/>- layer (default): split layers and KV across GPUs<br/>- row: split rows across GPUs<br/>(env: LLAMA_ARG_SPLIT_MODE) |
| `-ts, --tensor-split N0,N1,N2,...` | fraction of the model to offload to each GPU, comma-separated list of proportions, e.g. 3,1<br/>(env: LLAMA_ARG_TENSOR_SPLIT) |
| `-mg, --main-gpu INDEX` | the GPU to use for the model (with split-mode = none), or for intermediate results and KV (with split-mode = row) (default: 0)<br/>(env: LLAMA_ARG_MAIN_GPU) |
| `-fit, --fit [on\|off]` | whether to adjust unset arguments to fit in device memory ('on' or 'off', default: 'on')<br/>(env: LLAMA_ARG_FIT) |
| `--override-kv KEY=TYPE:VALUE,...` | advanced option to override model metadata by key. to specify multiple overrides, either use comma-separated or repeat this argument.<br/>types: int, float, bool, str. example: --override-kv tokenizer.ggml.add_bos_token=bool:false,tokenizer.ggml.add_eos_token=bool:false |
| `--op-offload, --no-op-offload` | whether to offload host tensor operations to device (default: true) |
| `--lora FNAME` | path to LoRA adapter (use comma-separated values to load multiple adapters) |
| `--lora-scaled FNAME:SCALE,...` | path to LoRA adapter with user defined scaling (format: FNAME:SCALE,...)<br/>note: use comma-separated values |
| `--control-vector FNAME` | add a control vector<br/>note: use comma-separated values to add multiple control vectors |
| `--control-vector-scaled FNAME:SCALE,...` | add a control vector with user defined scaling SCALE<br/>note: use comma-separated values (format: FNAME:SCALE,...) |
| `--control-vector-layer-range START END` | layer range to apply the control vector(s) to, start and end inclusive |
| `-m, --model FNAME` | model path to load<br/>(env: LLAMA_ARG_MODEL) |
| `-dr, --docker-repo [<repo>/]<model>[:quant]` | Docker Hub model repository. repo is optional, default to ai/. quant is optional, default to :latest.<br/>example: gemma3<br/>(default: unused)<br/>(env: LLAMA_ARG_DOCKER_REPO) |
| `-hf, -hfr, --hf-repo <user>/<model>[:quant]` | Hugging Face model repository; quant is optional, case-insensitive, default to Q4_K_M, or falls back to the first file in the repo if Q4_K_M doesn't exist.<br/>mmproj is also downloaded automatically if available. to disable, add --no-mmproj<br/>example: unsloth/phi-4-GGUF:q4_k_m<br/>(default: unused)<br/>(env: LLAMA_ARG_HF_REPO) |
| `-hfd, -hfrd, --hf-repo-draft <user>/<model>[:quant]` | Same as --hf-repo, but for the draft model (default: unused)<br/>(env: LLAMA_ARG_HFD_REPO) |
| `-hff, --hf-file FILE` | Hugging Face model file. If specified, it will override the quant in --hf-repo (default: unused)<br/>(env: LLAMA_ARG_HF_FILE) |
| `-hfv, -hfrv, --hf-repo-v <user>/<model>[:quant]` | Hugging Face model repository for the vocoder model (default: unused)<br/>(env: LLAMA_ARG_HF_REPO_V) |
| `-hffv, --hf-file-v FILE` | Hugging Face model file for the vocoder model (default: unused)<br/>(env: LLAMA_ARG_HF_FILE_V) |
| `-hft, --hf-token TOKEN` | Hugging Face access token (default: value from HF_TOKEN environment variable)<br/>(env: HF_TOKEN) |
| `--log-disable` | Log disable |
| `--log-file FNAME` | Log to file<br/>(env: LLAMA_LOG_FILE) |
| `--log-colors [on\|off\|auto]` | Set colored logging ('on', 'off', or 'auto', default: 'auto')<br/>'auto' enables colors when output is to a terminal<br/>(env: LLAMA_LOG_COLORS) |
| `-v, --verbose, --log-verbose` | Set verbosity level to infinity (i.e. log all messages, useful for debugging) |
| `--offline` | Offline mode: forces use of cache, prevents network access<br/>(env: LLAMA_OFFLINE) |
| `-lv, --verbosity, --log-verbosity N` | Set the verbosity threshold. Messages with a higher verbosity will be ignored. Values:<br/> - 0: generic output<br/> - 1: error<br/> - 2: warning<br/> - 3: info<br/> - 4: debug<br/>(default: 3)<br/><br/>(env: LLAMA_LOG_VERBOSITY) |
| `--log-prefix` | Enable prefix in log messages<br/>(env: LLAMA_LOG_PREFIX) |
| `--log-timestamps` | Enable timestamps in log messages<br/>(env: LLAMA_LOG_TIMESTAMPS) |
| `-ctkd, --cache-type-k-draft TYPE` | KV cache data type for K for the draft model<br/>allowed values: f32, f16, bf16, q8_0, q4_0, q4_1, iq4_nl, q5_0, q5_1<br/>(default: f16)<br/>(env: LLAMA_ARG_CACHE_TYPE_K_DRAFT) |
| `-ctvd, --cache-type-v-draft TYPE` | KV cache data type for V for the draft model<br/>allowed values: f32, f16, bf16, q8_0, q4_0, q4_1, iq4_nl, q5_0, q5_1<br/>(default: f16)<br/>(env: LLAMA_ARG_CACHE_TYPE_V_DRAFT) |
### Sampling params
| Argument | Explanation |
| -------- | ----------- |
| `--samplers SAMPLERS` | samplers that will be used for generation in the order, separated by ';'<br/>(default: penalties;dry;top_n_sigma;top_k;typ_p;top_p;min_p;xtc;temperature) |
| `-s, --seed SEED` | RNG seed (default: -1, use random seed for -1) |
| `--sampler-seq, --sampling-seq SEQUENCE` | simplified sequence for samplers that will be used (default: edskypmxt) |
| `--ignore-eos` | ignore end of stream token and continue generating (implies --logit-bias EOS-inf) |
| `--dry-base N` | set DRY sampling base value (default: 1.75) |
| `--dry-allowed-length N` | set allowed length for DRY sampling (default: 2) |
| `--dry-penalty-last-n N` | set DRY penalty for the last n tokens (default: -1, 0 = disable, -1 = context size) |
| `--dry-sequence-breaker STRING` | add sequence breaker for DRY sampling, clearing out default breakers ('\n', ':', '"', '*') in the process; use "none" to not use any sequence breakers |
| `--dynatemp-range N` | dynamic temperature range (default: 0.0, 0.0 = disabled) |
| `--dynatemp-exp N` | dynamic temperature exponent (default: 1.0) |
| `--mirostat N` | use Mirostat sampling.<br/>Top K, Nucleus and Locally Typical samplers are ignored if used.<br/>(default: 0, 0 = disabled, 1 = Mirostat, 2 = Mirostat 2.0) |
| `-l, --logit-bias TOKEN_ID(+/-)BIAS` | modifies the likelihood of token appearing in the completion,<br/>i.e. `--logit-bias 15043+1` to increase likelihood of token ' Hello',<br/>or `--logit-bias 15043-1` to decrease likelihood of token ' Hello' |
| `--grammar GRAMMAR` | BNF-like grammar to constrain generations (see samples in grammars/ dir) (default: '') |
| `--grammar-file FNAME` | file to read grammar from |
| `-j, --json-schema SCHEMA` | JSON schema to constrain generations (https://json-schema.org/), e.g. `{}` for any JSON object<br/>For schemas w/ external $refs, use --grammar + example/json_schema_to_grammar.py instead |
| `-jf, --json-schema-file FILE` | File containing a JSON schema to constrain generations (https://json-schema.org/), e.g. `{}` for any JSON object<br/>For schemas w/ external $refs, use --grammar + example/json_schema_to_grammar.py instead |
### CLI-specific params
| Argument | Explanation |
| -------- | ----------- |
| `--display-prompt, --no-display-prompt` | whether to print prompt at generation (default: true) |
| `-co, --color [on\|off\|auto]` | Colorize output to distinguish prompt and user input from generations ('on', 'off', or 'auto', default: 'auto')<br/>'auto' enables colors when output is to a terminal |
| `--ctx-checkpoints, --swa-checkpoints N` | max number of context checkpoints to create per slot (default: 8)[(more info)](https://github.com/ggml-org/llama.cpp/pull/15293)<br/>(env: LLAMA_ARG_CTX_CHECKPOINTS) |
| `-cram, --cache-ram N` | set the maximum cache size in MiB (default: 8192, -1 - no limit, 0 - disable)[(more info)](https://github.com/ggml-org/llama.cpp/pull/16391)<br/>(env: LLAMA_ARG_CACHE_RAM) |
| `--context-shift, --no-context-shift` | whether to use context shift on infinite text generation (default: disabled)<br/>(env: LLAMA_ARG_CONTEXT_SHIFT) |
| `-sys, --system-prompt PROMPT` | system prompt to use with model (if applicable, depending on chat template) |
| `--show-timings, --no-show-timings` | whether to show timing information after each response (default: true)<br/>(env: LLAMA_ARG_SHOW_TIMINGS) |
| `-sysf, --system-prompt-file FNAME` | a file containing the system prompt (default: none) |
| `-r, --reverse-prompt PROMPT` | halt generation at PROMPT, return control in interactive mode |
| `-cnv, --conversation, -no-cnv, --no-conversation` | whether to run in conversation mode:<br/>- does not print special tokens and suffix/prefix<br/>- interactive mode is also enabled<br/>(default: auto enabled if chat template is available) |
| `-st, --single-turn` | run conversation for a single turn only, then exit when done<br/>will not be interactive if first turn is predefined with --prompt<br/>(default: false) |
| `-mli, --multiline-input` | allows you to write or paste multiple lines without ending each in '\' |
| `--warmup, --no-warmup` | whether to perform warmup with an empty run (default: enabled) |
| `-mm, --mmproj FILE` | path to a multimodal projector file. see tools/mtmd/README.md<br/>note: if -hf is used, this argument can be omitted<br/>(env: LLAMA_ARG_MMPROJ) |
| `-mmu, --mmproj-url URL` | URL to a multimodal projector file. see tools/mtmd/README.md<br/>(env: LLAMA_ARG_MMPROJ_URL) |
| `--mmproj-auto, --no-mmproj, --no-mmproj-auto` | whether to use multimodal projector file (if available), useful when using -hf (default: enabled)<br/>(env: LLAMA_ARG_MMPROJ_AUTO) |
| `--mmproj-offload, --no-mmproj-offload` | whether to enable GPU offloading for multimodal projector (default: enabled)<br/>(env: LLAMA_ARG_MMPROJ_OFFLOAD) |
| `--image, --audio FILE` | path to an image or audio file. use with multimodal models, use comma-separated values for multiple files |
| `--image-min-tokens N` | minimum number of tokens each image can take, only used by vision models with dynamic resolution (default: read from model)<br/>(env: LLAMA_ARG_IMAGE_MIN_TOKENS) |
| `--image-max-tokens N` | maximum number of tokens each image can take, only used by vision models with dynamic resolution (default: read from model)<br/>(env: LLAMA_ARG_IMAGE_MAX_TOKENS) |
| `-otd, --override-tensor-draft <tensor name pattern>=<buffer type>,...` | override tensor buffer type for draft model |
| `-cmoed, --cpu-moe-draft` | keep all Mixture of Experts (MoE) weights in the CPU for the draft model<br/>(env: LLAMA_ARG_CPU_MOE_DRAFT) |
| `-ncmoed, --n-cpu-moe-draft N` | keep the Mixture of Experts (MoE) weights of the first N layers in the CPU for the draft model<br/>(env: LLAMA_ARG_N_CPU_MOE_DRAFT) |
| `--jinja, --no-jinja` | whether to use jinja template engine for chat (default: enabled)<br/>(env: LLAMA_ARG_JINJA) |
| `--reasoning-format FORMAT` | controls whether thought tags are allowed and/or extracted from the response, and in which format they're returned; one of:<br/>- none: leaves thoughts unparsed in `message.content`<br/>- deepseek: puts thoughts in `message.reasoning_content`<br/>- deepseek-legacy: keeps `<think>` tags in `message.content` while also populating `message.reasoning_content`<br/>(default: auto)<br/>(env: LLAMA_ARG_THINK) |
| `--reasoning-budget N` | controls the amount of thinking allowed; currently only one of: -1 for unrestricted thinking budget, or 0 to disable thinking (default: -1)<br/>(env: LLAMA_ARG_THINK_BUDGET) |
| `-cd, --ctx-size-draft N` | size of the prompt context for the draft model (default: 0, 0 = loaded from model)<br/>(env: LLAMA_ARG_CTX_SIZE_DRAFT) |
| `-devd, --device-draft <dev1,dev2,..>` | comma-separated list of devices to use for offloading the draft model (none = don't offload)<br/>use --list-devices to see a list of available devices |
| `-ngld, --gpu-layers-draft, --n-gpu-layers-draft N` | number of layers to store in VRAM for the draft model<br/>(env: LLAMA_ARG_N_GPU_LAYERS_DRAFT) |
